Zanussi ZWF7045D2WA Washing Machine User Manual
- June 15, 2024
- Zanussi
Table of Contents
- ZWF7045D2WA Washing Machine
- Product Information
- Specifications:
- Safety Instructions
- Explanation of Symbols:
- Electric Shock Warning:
- Risk to Children:
- Product Description:
- Installation Steps:
- Step 1: Loading Clothes
- Step 2: Selecting a Wash Cycle
- Step 3: Adjusting Settings
- Step 4: Starting the Wash
- Cleaning and Care:
- Question 1: How do I clean the detergent dispenser?
- Question 2: Can I use bleach in this washing machine?
ZWF7045D2WA Washing Machine
Product Information
Specifications:
- Model: ZWF7045D2WA, ZWF8045D2WA
- Type: Washing Machine
Safety Instructions
For your safety, please follow the instructions below to
minimize the risk of fire or explosion, electric shock, property
damage, personal injury, or loss of life.
Explanation of Symbols:
-
Warning! – This symbol and signal word
indicate a potentially dangerous situation that may result in death
or serious injuries if not avoided. -
Caution! – This symbol and signal word
indicate a potentially dangerous situation that may result in
slight or minor injuries or damage to property and the
environment. -
Note! – This symbol and signal word indicate a
potentially dangerous situation that may result in slight or minor
injuries.
Electric Shock Warning:
-
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent, or similarly qualified persons to
avoid hazards. -
The new hose-sets supplied with the appliance must be used. Do
not reuse old hose-sets. -
Before any maintenance on the device, unplug the appliance from
the mains. -
Always unplug the machine and turn off the water supply after
use. -
The maximum inlet water pressure: [specify value] pascals.
-
The minimum inlet water pressure: [specify value] pascals.
-
To ensure your safety, the power plug must be inserted into an
earthed three-pole socket. Make sure your socket is properly and
reliably earthed. -
The water and electrical devices must be connected by a
qualified technician following the manufacturer’s instructions and
local safety regulations.
Risk to Children:
-
The appliance can be used by children aged 8 years and above,
persons with reduced physical, sensory, or mental capabilities, or
those lacking experience and knowledge if they have been given
supervision or instruction on using the appliance safely and
understanding the hazards involved. -
Children shall not play with the appliance.
-
Cleaning and user maintenance should not be done by children
without supervision. -
Children under 3 years old should be supervised to ensure they
do not play with the appliance. -
Check the machine before every operation to prevent children
and animals from climbing into it. -
The glass door may become very hot during operation. Keep kids
and pets away from the machine during operation. -
Do not use the appliance in very wet rooms or rooms with
explosive or caustic gas.
Installation
Before using the appliance, follow the installation instructions
below:
Product Description:
[Describe the product’s features, design, and functions.]
Installation Steps:
- [Step 1]
- [Step 2]
- [Step 3]
- [Step 4]
Operations
To operate the washing machine, follow the instructions
below:
Step 1: Loading Clothes
[Describe how to load clothes into the machine.]
Step 2: Selecting a Wash Cycle
[Explain the available wash cycles and how to select them.]
Step 3: Adjusting Settings
[Explain how to adjust settings such as temperature, spin speed,
and additional options.]
Step 4: Starting the Wash
[Describe how to start the wash cycle.]
Maintenance
To ensure proper maintenance of the washing machine, follow the
instructions below:
Cleaning and Care:
[Explain how to clean different parts of the machine and provide
care tips.]
Troubleshooting
If you encounter any issues with the washing machine, refer to
the troubleshooting section in the user manual for solutions.
FAQ (Frequently Asked Questions)
Question 1: How do I clean the detergent dispenser?
Answer: To clean the detergent dispenser, [provide detailed
instructions].
Question 2: Can I use bleach in this washing machine?
Answer: Yes, you can use bleach in this washing machine. Follow
the instructions in the user manual for proper usage.
USER MANUAL
ZWF7045D2WA ZWF8045D2WA
………………………………………………………………………..
EN WASHING MACHINE
2
ZH
21
CONTENTS
Safety Instructions
Safety Instructions…………………………………………………………2
Installation
Product Description……………………………………………………….4
Installation…………………………………………………………………5
Operations
Quick Start…………………………………………………………………8 Before Each Washing……………………………………………………9
Detergent Dispenser……………………………………………………..9 Control
Panel…………………………………………………………….11 Option…………………………………………………………………….12 Other
Functions………………………………………………………….13 Programmes……………………………………………………………..14
Washing Programmes Table…………………………………………….15
Maintenances
Cleaning and Care……………………………………………………….16 Trouble
Shooting………………………………………………………..17
SAFETY INSTRUCTIONS
Safety Instructions
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury or loss of life. Explanation of the symbols:
Warning!
This combination of symbol and signal word indicates a potentially dangerous
situation which may result in death or serious injuries unless it’s avoided.
Caution!
This combination of symbol and signal word indicates a potentially dangerous
situation which may result in slight or minor injuries or damage to property
and the environment.
Note!
This combination of symbol and signal word indicates a potentially dangerous
situation which may result in slight or minor injuries.
Warning!
The electric shock!
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
The new hose-sets supplied with the appliance are to be used and that old
hose-sets should not be reused.
Before any maintenance the device, unplug the appliance from the mains. Always
unplug the machine and turn off the water supply after use. The max. Inlet
water pressure, in
pascals. The min. inlet water pressure, in pascals. To ensure your safety,
power plug must be inserted into an earthed three-pole socket. Check carefully
and make sure that your socket is properly and reliably earthed. Make sure
that the water and electrical devices must be connected by a qualified
technician in
accordance with the manufacturer’s instructions and local safety regulations.
Risk to children!
The appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
Children of less than 3years should be supervised to ensure that they do not
play with appliance. Animals and children may climb into the machine. Check
the machine before every operation. Kids should be supervised that they do not
play with the appliance. Glass door may be very hot during the operation. Keep
kids and pets far away from the machine during
the operation very wet rooms as well as in the rooms with explosive or caustic
gas. Remove all packages and transport bolts before using the appliance.
Otherwise, serious damage may
result. Plug must be accessible after installation.
Risk of explosion!
Do not wash or dry articles that have been cleaned in, washed in, soaked in,
or dabbed with combustible or explosive substances (such as wax, oil, paint,
gasoline, degreasers, dry-cleaning solvents, kerosene, etc.) This may result
in fire or explosion.
Beforehand thoroughly rinse items of washing by hand.
2
Caution!
Installing the product!
This washing machine is for indoor use only. The openings must not be
obstructed by a carpet. Washing machine shall not be installed in bath room or
very wet rooms as well as in the rooms with
explosive or caustic gases. The washing machine with single inlet valve only
can be connected to the cold water supply. The
product with double inlet valves should be correctly connected to the hot
water and cold water supply. Plug must be accessible after installation.
Remove all packages and transport bolts before using the appliance. Otherwise,
serious damage may
result.
Risk of damaging appliance!
Your product is only for home use and is only designed for the textiles
suitable for machine washing. Do not climb up and sit on top cover of the
machine. Do not lean against machine door. Cautions during Handling Machine:
1. Transport bolts shall be reinstalled to the machine by a specialized
person. 2. The accumulated water shall be drained out of the machine. 3.
Handle the machine carefully. Never hold each protruded part on the machine
while lifting. Machine door can not be used as the handle during the
conveyance. 4. This appliance is heavy. Transport with care. Please do not
close the door with excessive forces. If it is found difficult to close the
door, please check if the clothes are put in or distributed well. It is
forbidden to wash carpets.
Operating the appliance!
Before washing the clothes at first time, the product shall be operated in one
round of the whole procedures without the clothes inside.
Flammable and explosive or toxic solvents are forbidden. Gasoline and alcohol
etc. Shall not be used as detergents. Please only select the detergents
suitable for machine washing, especially for drum.
Make sure that all pockets are emptied. Sharp and rigid items such as coin,
brooch, nail, screw or stone etc. may cause serious damages to this machine.
Please check whether the water inside the drum has been drained before opening
its door. Please do not open the door if there is any water visible.
Be careful of burning when the product drains hot washing water. Never refill
the water by hand during washing. After the program is completed, Please wait
for two minutes to open the door.
Environment
From 31 December 2018, the disposal licensing control, import and export
permit control and landfill disposal ban in respect of abandoned regulated
electrical equipment (REE) have commenced. Any person who is engaged in the
storage, treatment, reprocessing or recycling of abandoned REE must obtain a
waste disposal licence; a permit is required for the import and export of
abandoned REE; and abandoned REE is no longer be accepted for disposal at the
landfills and other designated waste disposal facilities (e.g. refuse transfer
stations).
3
INSTALLATION
Product Description
Note!
The product line chart is for reference only, please refer to real product as
standard.
Accessories
Transport hole plug
Supply hose cold water
Supply hose hot water (optional)
Drain hose
Owner’s manual
(optional support)
4
Installation area
Warning!
Stability is important to prevent the product from wandering! Make sure that
the product should not stand on the power
cord.
Before installing the machine, the location characterized as follows shall be
selected: 1. Rigid, dry, and level surface 2. Avoid direct sunlight 3.
Sufficient ventilation 4. Room temperature is above 0ºC 5. Keep far away from
the heat resources such as coal or gas.
Unpacking the washing machine
Warning!
Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
There is a risk of suffocation! Keep all packaging well away from children.
Remove transport bolts
Warning!
You must remove the transport bolts from the backside before using the
product.
You’ll need the transport bolts again if you move the product, so make sure
you keep them in a safe place.
Please take the following steps to remove the bolts: 1. Loosen 4 bolts with
spanner and then remove them. 2. Stop the holes with transport hole plugs. 3.
Keep the transport bolts properly for future use.
5
Levelling the washing machine
Warning! The lock nuts on all four feet must be screwed tightly against the
housing.
1. Check if the legs are closely attached to the cabinet. If not, please turn
them to their original positions tighten the nuts. 2. Loosen the lock nut turn
the feet until it closely contacts with the floor. 3. Adjust the legs and lock
them with a spanner, make sure the machine is steady.
Connect Water Supply Hose
Warning!
To prevent leakage or water damage, follow the instructions in this chapter Do
not kink, crush, modify or sever water inlet hose.
For the model equips hot valve, connect it to hot water tap with hot water
supply hose. Energy
consumption will decrease automatically for some program. Connect the inlet
pipe as indicated, There are two ways to connect the inlet pipe. 1. Connection
between ordinary tap and inlet hose.
Loosen clamp nut and four bolts
Tighten clamp nut
Press slide bushing, insert inlet hose into connecting base
Connection finished
Tap with threads and inlet hose
Special tap for washing machine 6
Connect the other end of inlet pipe to the inlet valve at the backside of
product and fasten the pipe tightly clockwise.
Drain Hose
Warning! Do not kink or protract the drain hose. Position drain hose properly,
otherwise damage might result of water leakage.
Connect it to the branch drain pipe of the trough.
Note! If the machine has drain hose support, please install it like the
following.
Warning! When installing drain hose, fix it properly with a rope.
If drain hose is too long, do not force it into washing machine as it will
cause abnormal noises.
7
OPERATIONS
Quick Start
Caution!
Before washing, please make sure it’s installed properly. Before washing at
first time, the washing machine shall be operated in one round of the whole
procedures without clothes in as follows.
1. Before Washing
Plug in
Open tap
Load
Close door
Add detergent
Note!
Detergent need to be added in “case I “after selecting pre-washing for
machines with this function.
2. Washing
Select Programme
Select function or default
Start up
Note!
If default is selected, step 2 can be skipped.
3. After Washing
“End” on display.
8
Before Each Washing
The working condition of the washer should be (0-40) ºC. If used under 0ºC,
the inlet valve and draining system may be damaged. If the machine is placed
under condition of 0ºC or less, then it should be transferred to normal
ambient temperature to ensure the water supply hose and drain hose are not
frozen before use.
Please check the labels and the explanation of using detergent before wash.
Use non-foaming or lessfoaming detergent suitable for machine washing
properly.
Check the label
Take out the items out of the pockets
Knot the long strips, zip or button
Put small clothes into the pillow slip
Turn easy-pilling and long-pile fabric inside out
Separate clothes with different textures
Warning!
When washing a single clothes, it may easily cause great eccentricity and give
alarm due to great unbalance. Therefore it is suggested to add one or two more
clothes to be washed together so that draining can be done smoothly.
Don’t washing the clothes touching with kerosene, gasoline, alcohol and other
flammable materials.
Detergent Dispenser
I Pre wash detergent II Main wash detergent
Softener
Liquid detergent
Powder detergent 9
Pull out the dispenser
Caution!
Detergent only need to be added in “case I “after selecting pre-washing for
machines with this function.
Programme
I
II
Cottons Eco
Cottons
Quick 15
Daily 45
Daily 60
Rinse & Spin
Spin
Means must Means optional
Programme
I
II
Tub Clean Wool Delicate Mixed Denim Baby Care Synthetic
Note!
As for the agglomerated or ropy detergent or additive, before they are poured
into the detergent box, it is suggested to use some water for dilution to
prevent inlet of detergent box from being blocked and overflowing while
filling water.
Please choose suitable type of detergent for the various washing temperature
to get the best washing performance with less water and energy consumption.
10
Control Panel
Note!
The chart is for reference only, Please refer to real product as standard.
Off
Start/Pause
Product is switched off. Option
Press the button to start or pause the washing cycle.
Programmes
This allows you to select an additional function and will light when selected.
Display
Available according to the laundry type.
The display shows the settings, estimated time remaining, options, and status messages for your washer. The display will remain on through the cycle.
11
Option
Prewash
Prewash
The Prewash function can get an extra wash before main wash, it is suitable
for washing the dust rises to surface of the clothes; You need to put
detergent into the Case (I) when select it.
Extra Rinse
Extra Rinse
The laundry will undergo extra rinse once after you select it.
Delay Start
Delay Start
Set the Delay function: 1. Select a programme; 2. Press the Delay button to
choose the time (the delaying time is 0-24 H.); 3. Press [Start/Pause] to
commence the delay operation
Choose the Programme
Setting time
Start
Cancel the Delay function: Press the [Delay] button until the display be 0H. It should be pressed before starting the programme. If the programme already started, should switch off programme to reset a new one.
Caution!
If there is any break in the power supply while the machine is operating, a
special memory stores the selected programme and when the power is restarted,
the program will continue.
Programme
Cottons Eco Cottons Quick 15 Daily 45 Daily 60 Rinse & Spin Spin
Delay
Option
Extra Prewash rinse
Programme
Tub Clean Wool Delicates Mixed Denim Baby Care Synthetic
Delay
Option
Extra Prewash rinse
Means optional (Some models have intelligent weighing function, please refer to the actual product)
12
Other functions
Temp. Temp. Press the button to regulate the temperature (Cold, 20°C, 30°C, 40°C, 60°C, 90°C)
Speed
Speed
Press the button to change the speed 1200:
0-400-600-800-1000-1200
1400: 0-400-600-800-1000-1200-1400
Programme
Cottons Eco Cottons Quick 15
Default Speed(rpm)
1200 1400
800
800
1200 800
1200 800
Daily 45 Daily 60
800 1000
800 1000
Rinse & Spin 1000
Spin
1000
1000 1000
Programme
Tub Clean
Wool Delicates Mixed Denim Baby Care Synthetic
Default Speed(rpm)
1200
1400
400
400
400 600
1000 800
1000 1200
400 600
1000 800
1000 1200
Child Lock
To avoid mis operation by children.
Choose the Programme
Start
Press [Speed] and [Delay] 3 sec. till buzzer beep.
Caution!
Press the two button 3sec. also to be released the function The “Child Lock”
will lock all buttons except Power button. Cut off the power supply , the
kid’s protection is to be released. The child lock will remain effective when
the power is resumed for some models.
Mute the buzzer
To avoid mis operation by children.
Choose the Programme
Press the [Temp.]button for 3sec., the buzzer is mute.
To act the buzzer function, press the button again for 3 seconds. The setting will be kept until the next reset.
13
Caution!
After Muting the buzzer function, the sounds will not be activated any more.
My Cycle
To memory the frequently used programme. After choosing the programme and
setting the options, press [Speed] 3 sec. before start to wash.The default
setting course is Cottons Eco.
Programmes
Programmes are available according to the laundry type.
Programmes
Cottons
Hard-wearing textiles, heat-resistant textiles made of Cottons or linen.
Synthetic
Wash synthetic articles, for example: shirts, coats, blending. While washing the knitting textiles, detergent quantity shall be reduced due to its loose string construction and easily forming bubbles.
Baby Care
Washing the baby,s clothes, it can make the baby’s wear cleaner and make the rinse performance better to protect the baby skin.
Daily 45
Washing few and not very dirty clothes quickly.
Mixed
Mixed load consisting of textiles made of Cottons and synthetics.
Daily 60
It is suitable for washing few and not very dirty clothes quickly.
Denim
Specially for Denim.
Quick 15
Extra short programme approx, suitable for lightly soile led washing as a small amounts of laundry.
Delicate
For delicate, washable textiles, e.g. made of silk, satin, synthetic fibres or blended fabrics.
Wool
Hand or machine-washable wool or richwool textiles Especially gentle wash programme to prevent shrinkage, longer programme pauses (textiles rest in wash liguor).
Spin
Extra spin with selectable spin speed.
Rinse & Spin
Extra rinse with spin.
Cottons Eco
To increase the washing effects, washing time is increased.
Tub Clean
Specially set in this machine to clean the drum and tub. It applies 90°C high temperature sterilization to make the washing more green. When proper amount of chlorine bleaching agent is put in, the barrel cleaning effect will be better. The customer can use this programme regularly according to the need
14
Washing Programmes Table
Programme
Load(kg)
Temp.(°C) Default Time
7.0
Cottons Eco
7.0
Cottons
7.0
Quick 15
2.0
Daily 45
2.0
Daily 60
2.0
Rinse & Spin
7.0
Spin
7.0
Tub Clean
–
Wool
2.0
Delicates
2.5
Mixed
7.0
Denim
7.0
Baby Care
7.0
Synthetic
3.5
8.0
Default
7.0
8.0
8.0
30
0:58
8.0
40
Aut
2.0
Cold
0:15
2.0
30
0:45
2.0
Cold
1:00
8.0
–
0:31
8.0
–
0:12
–
90
1:21
2.0
40
2.5
30
8.0
40
8.0
40
8.0
30
4.0
40
1:06 1:00 1:13 1:48 1:20 2:20
Note!
The parameters in this table are only for user’s reference. The actual
parameters maybe different with the parameters in above mentioned table.
15
Cleaning And Care
Warning! Before your maintenance starts, please unplug the machine and close
the tap.
Cleaning The Cabinet
Proper maintenance on the washing machine can extend its working life. The
surface can be cleaned with diluted non-abrasive neutral detergents when
necessary. If there is any water overflow, use the wet cloth to wipe it off
immediately. No sharp items are allowed.
Note!
Formic acid and its diluted solvents or equivalent are forbidden, such as
alcohol, solvents or chemical products, etc.
Cleaning The Drum
The rusts left inside the drum by the metal articles shall be removed
immediately with chlorine-free detergents. Never use steel wool.
Note!
Don’t put laundry in the washing machine during the Tub Cleaning.
Cleaning The Door Seal And Glass
Wipe the glass and seal after each wash to remove lint and stains. If lint
builds up it can cause leaks. Remove any coins, buttons and other objects from
the seal after each wash.
16
Cleaning The Inlet Filter
Note!
Inlet filter must be cleaned if there is less water.
Washing the filter in the tap 1. Close the tap. 2. Remove the water supply
hose from the tap. 3. Clean the filter. 4. Reconnect the water supply hose.
Washing the filter in washing machine: 1. Screw off the inlet pipe from the
backside of the machine. 2. Pull out the filter with long nose pliers and
reinstall it back after being washed. 3. Use to clean the filter. 4. Reconnect
the inlet pipe.
Note!
If the brush is not clean, you can pull out the filter washed separately;
Reconnect, turn on the tap.
Clean The Detergent Dispenser
1. Press down the arrow location on softener cover inside the dispenser
drawer. 2. Lift the clip up and take out softener cover and wash all grooves
with water. 3. Restore the softener cover and push the drawer into position.
Pull out the dispenser
Clean the dispenser
drawer with press the A drawer under water
Clean inside the recess with an old toothbrush
Note!
Do not use alcohol, solvents or chemical products to clean the machine.
Insert the dispenser drawer
17
Cleaning The Drain Pump Filter
Warning!
Be careful of the hot water! Allow detergent solution to cool down. Unplug the
machine to avoid electrical shock before washing. Drain pump filter can filter
the yarns and small foreign matters from the washing. Clean the filter
periodically to ensure the normal operation of washing machine.
Open the lower cover cap
Rotate 90°C and pull out the emergency drain hose,
and take off the hose cap
After water runs out, reset the drain hose
Open the filter by turning to the counter clockwise
Remove extraneous matter
Close the lower cover cap
Caution!
Make sure that valve cap and emergency drain hose are reinstalled properly,
cap plates should be inserted aligning to hole plates otherwise water may
leak.
Some machines don’t have emergency drain hose, so step 2 and step 3 can be
skipped. Rotate lower cover cap directly to make water run into basin.
When the appliance is in use and depending on the programme selected there can
be hot water in the pump. Never remove the pump cover during a wash cycle,
always wait until the appliance has finished the cycle, and is empty. When
replacing the cover, ensure it is securely re-tightened.
18
Trouble Shooting
The start of the appliance does not work or it stops during operation.
First try to find a solution to the problem, If not, contact the service
centre.
Description
Reason
Solution
Washing machine cannot start up Door can’t be opened
Water leakage
Detergent residues in the box Indicator or display does not light
Abnormal noise
Door is not closed properly
Washer’s safety protection design is working
The connection between inlet pipe or outlet hose is not tight
Detergent is dampened or agglomerated
Disconnect the power PC board or harness has connection problem
Restart after the door is closed ; Check if the clothes is stuck Disconnect
the power, restart the product
Check and fasten water pipes; Clean up outlet hose
Clean and wipe the detergent box
Check if the power is shut down and the power plug is connected correctly
Check if the fixing (bolts) have been removed; Check it’s installed on a solid
and level floor
Description
Reason Door is not closed properly Water injecting problem while washing
Overtime water draining Water overflow Others
Solution
Restart after the door is closed; Check if the clothes is stuck Check if the
water pressure is too low ; Straighten the water pipe; Check if the inlet
valve filter is blocked Check if the drain hose is blocked
Restart the washer
Please try again first, call up service line if there are still troubles
Note!
After the check, activate the appliance. If the problem occurs or the display
shows other alarm codes again, contact the service.
Note!
The actual parameters will depend on how the applicance is used,and maybe
different with the parameters in above mentioned table.
The household washing machine is equipped with power management system.The
duration of the lefton mode time is less than 10 minute.
The noise emissions during washing/spinning for the standard washing cycle at
full load.
19
21
25
26
27
28
28
30
31
32
33
34
35
36
(PA)
(PA)
8 ()
3
21
1. 2. 3. 4.
2018 12 31
22
23
1. 2. 3. 4. 0 5.
1. 4 2. 3.
24
1. 2. 3.
;
()
()
25
26
- 1
-
2
-
: “End”
27
0°C40°C 0°C 0
28
1
I II
I II
15
45
60
29
1. 2. / 3. 4. 5.
30
Prewash
Extra Rinse Delay Start
I 1. 2. 0-24H 3. [/] [] 0H
15
45
60
31
20°C30°C40°C60°C90°C
12000-400-600-800-1000-1200
14000-400-600-800-1000-1200-1400
15 45 60
(rpm)
1200
1400
800
800
1200
1200
800
800
800
800
1000
1000
1000
1000
1000
1000
(rpm)
1200
1400
400
400
400
400
600
600
1000
1000
800
800
1000
1000
1200
1200
[][] 3
3 “”
[] 3
3
32
[] 3
45
60
15
90°C
33
15 45 60
()
7.0
8.0
7.0
8.0
7.0
8.0
2.0
2.0
2.0
2.0
2.0
2.0
7.0
8.0
7.0
8.0
–
–
2.0
2.0
2.5
2.5
7.0
8.0
7.0
8.0
7.0
8.0
3.5
4.0
°C 30 40 30 90 40 30 40 40 30 40
7.0
8.0
0:58
0:15 0:45 1:00 0:31 0:12 1:21 1:06 1:00 1:13 1:48 1:20 :
34
35
1. 2. 3. 4. 1. 2.
3. 4.
1. 2. 3.
36
90°
2 3
37
PC
E30
E10
E21
E12
EXX
10 /
38
www.zanussi.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>