soundcore Earbuds User Manual
- June 7, 2024
- Soundcore
Table of Contents
Soundcore Life P3
Quick Start Guide
For FAQs and more information, please visit:
Model: A3939, A3939L, A3939R 51005002767 V03
@SoundcoreAudio @soundcoreaudio @soundcoreaudio
SUPPORT 1
For FAQs, detailed user manual and more information, please visit www.soundcore.com/support
APP
2
Google Play and the Google Play logo are trademarks of Google Inc.
Apple and the Apple logo are trademarks of Apple Inc.
Download the Soundcore App to customize the user interface (e.g. adjust volume, control playback, activate Siri), adjust EQ, switch ANC modes, update firmware, and e×plore more.
FIRMWARE UPGRADE 3
Ensure the earbuds are placed in the charging case and the case remains open until the firmware upgrade is completed.
AMBIENT SOUND 4
Switch ANC/Transparency/Normal modes in the Soundcore App.
- ANC (Active Noise Cancellation): Reduce unwanted background noise.
- Transparency: Stay aware of your surroundings while listening to music.
WEARING 5
1 2
Choose the EarTips that fit your ears best.
CHARGING 6
Fully dry off the earbuds and the USB-C charging port before charging.
Use a certified USB-C charging cable to prevent any damage.
For wireless charging, position the charging case at the center of your
wireless charger.
POWERING ON/OFF 7
ON
OFF 1 2
Open the charging case, the earbuds will automatically power on.
To power off, place the earbuds in the charging case and close it.
PAIRING 8
1 2
Open the charging case, the earbuds will automatically enter the Bluetooth pairing mode. Select “Soundcore Life P3″ on your device’s Bluetooth list to connect.
CONTROLS 9
×2: Tap twice 2s: Press and hold for 2 seconds
RE-PAIRING 10
Pairing with another device: Place the earbuds in the charging case and leave the case open. To enter pairing mode, press and hold the button on the case for 3 seconds until the 3 LED indicators flash white in sequence continuously.
RESET 11
Reset if the earbuds cannot properly pair with each other or with other
devices.
Place the earbuds in the charging case and leave the case open.
Press and hold the button on the case for 10 seconds until the 3 LED
indicators flash white 3 times and then flash white in sequence continuously.
This confirms that the reset was successful and your earbuds can be connected
normally.
LED LIGHT GUIDE 12
Steady white
Flashing white
13
Customer Service
18-month limited warranty
Lifetime technical support
Our warranty is additional to the legal rights consumers have buying this product.
service@soundcore.com
support.mea@soundcore.com (For Middle East
and Africa Only)
support@anker.com
+1 (800) 988 7973 (US) Mon-Fri 6:00 – 17:00 (PT)
+44 (0) 1604 936200 (UK) Mon-Fri 6:00 – 11:00 (GMT)
+49 (0) 69 9579 7960 (DE) Mon-Fri 6:00 – 11:00
03 4455 7823 () – 9:00 – 17:00
+86 400 0550 036 () 9:00 – 17:30
+82 02-1670-7098 () ~ 10:00 – 17: 00
+971 42463266 (Middle East & Africa) Sun-Thu 9:00 – 17:30 (GMT+4)
+971 8000320817 (UAE) Sun-Thu 9:00 – 17:30 (GMT+4)
+966 8008500030 (KSA) Sun-Thu 8:00 – 16:30 (GMT+3)
+965 22069086 (Kuwait) Sun-Thu 8:00 – 16:30 (GMT+3)
+20 8000000826 (Egypt) Sun-Thu 7:00 – 15:30 (GMT+2)
Input: 5V 0.35A
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
ANKER TECHNOLOGY (UK) LTD
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United
Kingdom
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany