HUBERT Automatic Soap Dispenser Stand User Manual

June 7, 2024
HUBERT

HUBERT Automatic Soap Dispenser Stand User Manual

HUBERT Automatic Soap Dispenser Stand

Check all components

Part QTY
Soap dispenser 1
Base 1
Pole 3
Drip tray 1
Paper bill board 1
Black plate 1
Screw accessories 1bag
Key 1
Tableting 1
Step 1


There is a tabletting whcih above the stainless steel tube, rotate it 90 degress,
make it as·+· shape.

Step 2


There are 3parts of poles(up+mlddle+down), put a washer between each pole.connect them by fully lightened all the bolts.

Step 3

a close up of a logo
Make the screw hole end the tube aim at the screw hole on the platform, and insert the big steel plate.use the large hexagon screw fix It.

Step 4

diagram
Install the soap dispenser into the top of the stainless steel tube, aim at the screw hole on tab letting and use the screw fix It.

Step 5

a close up of a lift
Make the screw hole downside the billboard aim at the screw hole on the top of stainless steel back plane, use the tab letting and screw fix it.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals