HUBERT Black Metal Bakery Tray Rack 77846 Instruction Manual
- June 6, 2024
- HUBERT
Table of Contents
Black Metal Bakery Tray Rack
Item# 77846
ASSEMBLY INSTRUCTIONS
1. Top Bar
2. Tray Shelf x 6
3. Base
4. Sign Holder
5. Left Side
6. Right Side
7 Countersunk Bolt x 2
8, Hex Bolt x 4| 9. Black Flat Washer x 4
10. Black Lock Washer x 4
11. Caster x 4(2locking)
12. Flat Washer x 4
13. Lock Washer x 4
14, Allen Wrench
15. Wrench
---|---
- Insert the bottom of the Left Side into the Base as shown, with slots facing inward. Secure Left Side to Base with 2 Hex Bolts, 2 Black Lock Washers, and 2 Black Flat Washers. Repeat on Right Side.
- Attach Top Bar to sides as shown with 2 Countersunk Bolts.
- Lay frame on its side and screw in 4 casters, with 4 Lock Washers and 4 Flat Washers. Be sure to install locking casters on the front side.
- Lift frame upright and install shelves from the back, where the shelf slots are visible, starting with the bottom shelf. Gripping shelf with each hand in the center of one of the horizontal wires, align 4 wire ends with slots as shown and slide forward, then down to secure.
- Insert Sign Holder into Top Bar as shown.
9555 Dry Fork Rd.
Harrison, OH 45030
800-543-7374
www.hubert.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>