Thermador PRG305WH 30 inch Gas Pro Harmony Range User Guide
- June 7, 2024
- Thermador
Table of Contents
PRG305WH
30-INCH GAS PRO HARMONY® RANGE
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
FEATURES & BENEFITS
- Exclusive, Star ® Burner — most even heating, unsurpassed flame coverage
- ExtraLow® feature provides a wide range of temperature control, perfect for simmering delicate sauces
- 2 ExtraLow ®burners for simmering, melting, or holding long durations
- QuickClean Base ® designed for easy surface cleaning
- Convection Bake offers precise multi-level baking results
RANGETOP
TECHNICAL DETAILS
| |
OVEN
|
---|---|---|---
Circuit Breaker| 15 A| Oven Capacity| 4.6 cup. ft.
Volts| 120 V, 60Hz| Cooking Modes
Bake, Convection Bake, Roast, Broil, Extended Bake
Energy Source| Gas
Plug Type the USA| 120V – 3 Prong| Sabbath| Yes (as Extended Bake – Knob
Control)
Power Cord Length| 65″ (1,651mm)| Self Clean| No
Gas Supply| 33| Telescopic Rack(s)| 1
WARRANTY
| | Interior Lights| 2
Limited Warranty, Entire Appliance, Parts, and Labor| 2 Year| Bake Power|
20,500 BTU
Total number of cooktop Burners| 5| Broil Power| 17,500 BTU
1 – Power of Back Left Burner BTU| 8,000 and XLO| Home Connect™ (Wi-Fi
Enabled)| No
2 – Power of Front Left Burner BTU| 18,000 and XLO| Cavity Interior Dimensions
(HxWxD)| 16 ½” x 26″ x 18 5/8
3 – Power of Center Burner BTU| 10,000| Cavity Usable Dimensions (HxWxD)| 11¼x
22 3/8 x 16 3/4
4 – Power of Back Right Burner BTU| 8,000|
DIMENSIONS &WEIGHT
|
5 – Power of Front Right Burner BTU| 15,000| Overall Appliance Dimensions
(HxWxD)| 35¾” – 36 3/4 ” x 29 15/16″x 24 5/8″
Required Cutout Size (HxWxD)| 35¾” – 36 ¾” x 30″ x 24″
Net Weight| 368 lbs.
ACCESSORIES (INCLUDED)
1 Telescopic Rack, 2 Standard Racks, 1 Lg. Broil Pan, Island Trim
ACCESSORIES (OPTIONAL)
| PWOKRINGHC
Wok Ring
---|---
| PAGRIDDLE
Professional Griddle, Sits on Top of Grates Over
2 Star Burners, High-Release Coating
| PARKB3XHY
Metallic Blue Knob Kit
| PA12CHPBLK
Chopping Block / Cutting Board
| PA30WLBH
Pro Harmony 7″ Low Backguard*
| PALPKITGW5
LP Conversion Kit, Pro Harmony Gas Model PRG305WH
only (5 Burners)
PAALTKITHW
High Altitude Kit, Natural Gas Pro Harmony Ranges, 5,400 ft. to 10,200 ft.
Contact Customer Support
High Altitude Kit, Gas or Dual-Fuel Pro Harmony Ranges Connected to LP Gas,
10,000 ft. to 10,200 ft.
- Models PCG305xx, PRD305xx, PRD606xx, PRG305xx, PRG304xx, and PRD304xx are suitable for 0″ rear clearance to combustible surfaces other models: when using the included Island Trim a minimum 6″ (152 mm) rear clearance is required o a combustible surface. When installing against a combustible surface, a Thermador® Low Backguard is required for a 0″ rear clearance to the combustible surface. A Thermador Low Backguard must be purchased separately. A rear clearance to a surface covered in a noncombustible material (metal, ceramic tile, brick, marble, or stone) is 0″ when using the included Island Trim. clearance of less than 6″ (152 mm) should be approved by the local codes and/or by the local authority having jurisdiction. clearance from non-combustible materials are not part of the ANSI Z21.1 scope and are not certified by CSA
30-INCH RANGE DIMENSIONS
30-INCH RANGE CUTOUT DIMENSIONS
30-INCH RANGE CABINET CLEARANCES WITH HOOD
Δas defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition).
scope and are not certified by CSA.
FIGURE 4
30-INCH RANGE CABINET CLEARANCES WITH OVER-THE-RANGE MICROWAVE
NOTE: A 36-inch minimum clearance is required between the top of the cooking surface and the bottom of an unprotected cabinet. A 30-inch clearance can be used when the bottom of the wood or metal the cabinet is protected by not less than 11 /44 inches a flame retardant material covered with not less than No. 28 MSG sheet steel, 0.015 inches (0.4 mm) thick stainless steel, 0.024 inches (0.6 mm) aluminum, or 0.020 inches (0.5 mm) thick copper.
Δas defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition). Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and are not certified by CSA.
These warranties give you specific legal rights and you may have other rights
that vary from state to state. Full warranty and limited warranty from date of
installation. For complete warranty
details, refer to your Use & Care manual, or ask your dealer. Specifications
are for planning purposes only. Refer to installation instructions and consult
your countertop supplier before making the counter opening. Consult with a
heating and ventilation engineer for your specific ventilation requirements.
For the most detailed information, refer to installation instructions
accompanying the product or write to Thermador indicating the model number.
Specifications are correct at the time of printing. Thermador reserves the
right to change product specifications or design without notice. Some models
are certified for use in Canada. Thermador is not responsible for products
that are transported from the U.S. for use in Canada.
1 800 735 4328 | USA THERMADOR.COM | CANADA THERMADOR.CA | ©2020 BSH HOME
APPLIANCES CORPORATION. ALL RIGHTS RESERVED.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>