Hiby RS8 Flagship Music Player User Guide

: June 3, 2024
: Hiby

Hiby RS8 Flagship Music Player

Buttons and ports

① Micro SD card slot
② volume knob
③ Power button
④ LED status light
⑤ Previous
⑥ Play/pause
⑦ Next
⑧ 4.4mm balanced headphone jack
⑨ 3.5mm headphone jack
⑩ TYPE-C
⑪ 3.5mm line out
⑫ 4.4mm balanced line out

Essential operations

Power on

Hold Power button for 2s to power on

Power off / restart

a. Press power button to turn screen on ,if screen is off
b. Press and hold power button until power menu is show.

Lock screen

When screen is on, press power button to activate lock screen (turn screen off).

Turn screen on

If screen is off while device is powered on, press power button or double-tap screen to turn screen on.

Forced restart

Press and hold power button 15s to force restart, if device is e.g. frozen for unknown reason.

Operating system

The HiBy RS8 comes preinstalled with Android 12, and its OS operations are in line with a typical Android 12 phone. You may install 3rd party apps using Google Play.

It comes preloaded with HiBy Music Professional edition, a music player app designed from the ground up for high fidelity, with strong functionality and intuitive UI;

RGB LED

The LED on the RS8 power button may be used to indicate the currently playing music format I sample rate.

Red Charging
Yellow Playing–PCM 32-48kHz
Cyan Playing–PCM 64-192kHz
Orange Playing–PCM 352.8kHz and up
White Playing–DSD
Green Playing–MQA
Blue Playing–MQA studio
Magenta MQA Rendering

USB3.1 over type-C USB connectivity options

File transfer

Connect data cable from RS8 to computer. Once connection succeeds, on the RS8, pull down the notification shade, scroll down to where it says ·usb for charging·, tap it and change it to “File transfer”, and your RS8 will then show up as a drive on your computer for you to transfer files to and from its internal storage or SD card.

USB audio output

Connect the RS8 to a USB DAC via its type C port and audio may be output directly to the USB DAC (function update upcoming).

USB audio input

a. To use the RS8 as a USB DAC for the computer, connect it to the computer via USB data cable, then pull down the notification shade, scroll down to where it says ·uss for charging”, tap it and change it to “audio input”;
b. Also, driver installation on the computer is required. Please download the USB DAC input driver at www.hiby.com and read the included USB DAC usage instruction pdf carefully.

Wireless connectivity

Bluetooth 5.0

To connect a Bluetooth device (earphones, speakers, etc.) to the RSS for the f irst time. pair it to the RSS as follows:
a. Pull down notification shade and hold finger on Bluetooth button until the settings page for Bluetooth comes up;
b. Turn on Bluetooth (if not already on);
c. Set your Bluetooth device to pairing mode (consult documentation on your Bluetooth device for how to do this);
d. Tap on “pair new device· on the RSS to search for new devices to be paired;
e. Tap on the name for your new device to pair and connect with it; successfully paired devices will appear on the list of “paired devices·.

Wi-Fi

The RS8 supports both 2.4GHz and 5GHz Wi-Fi, which may be used to connect the RS8 to the Internet for streaming music, as well as the various Wi-Fi functions of HiBy Music such as Wi-Fi music transfer, HiBy link, DLNA runic access etc.
a. Pull down notification shade and hold finger on Wi-Fi button until settings page for Wi-Fi comes up;
b. Turn on Wi-Fi(if not already on);
c. Tap on the name of your Wi-Fi network.
d. Enter the password for your Wi-Fi network and tap Connect.

Firmware update

OTA online update

Updating automatically via Wi-Fi is recommended.
The RS8 will automatically detect updates and prompt about the update in the notification shade if an update is found;
You may also go to Settings->System->System Updates to manually check for and download updates;
Install updates after they are downloaded to update your device. Please make sure device is well charged before update and do not try to operate the device during the update.

OTA (Direct Transport Audio) Architecture

The HiBy Music DTA Architecture circumvents Android sample rate conversion on a system level to reliably product completely lossless audio streams on Android;
The preinstalled HiBy Music app may directly output DSD512, PCM768kHz / 32bit and MQA at 16x unfold; DTA provides the groundwork for all 3rd party apps to output at these same formats and rates but certain 3rd party apps may not be able to do so. owing to limitations inherent in the app (e.g. assuming the system is unable to output at those formats I rates and resampling internally before handing out audio to system).

Scan QR code http://track.hiby.com/Manual/Find?p=HiByRS8&l=en to obtain further operating guides

Cautions

Do not repair, disassemble. or place the product in a place with water.
When the product is not used for a long time, it is necessary to periodically charge the product to ensure battery life.
When you use the headphones. you will not be able to hear the external environment. For your safety. please avoid using the headphones in a dangerous environment.
Charging with a charger with too high voltage may damage the device. Please choose a recommended charger to charge.
Hold the power button for 30 seconds to force restart the device if the system crashes.

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(l )this device may not cause harmful interference, and (2hhis device must accept any interference received. including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation.
This equipment generates. Uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However. There is no guar. intel th.it interference will not occur in a particular installation.
lf this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement :
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

HiBy Official Online Store

Tmall
https://hibysm.tmallt.com
JD.com
https://mall.jd.com/index-852084.html
Website
www.hiby.com
llnternational official website
http://store.hiby.com

To learn more

WeChat

| Weibo-SINA|

Facebook

---|---|---

Global after-sales service

Please contact us at seNice@hiby.com or directly contact the store you purchased from.

DONGGUAN SMARTACTION TECHNOLOGY CO.,LTD.

TEL: 0086-769-23182216 Website: www.hiby.com
Email: service@hiby.com
Address: Room 1201, Leaning Commercial Building, No.39,
Hongwei 3rd Road, Nanchang District, Dongguan, Guangdong, China

Specific Absorption Rate(SAR)information This device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientifstudies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposurelnformation and Statement the SAR limit of USA(FCC) is 1. 6 w/ kg averaged over one gram of tissue Device types: Music Player(FCC ID: 2AOBQ-HIBYRS8)has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the device kept 10mm from the body To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user’s body and the back of the phone. The use of belt clips, holsters and similar accessories should notcontain metallic components in its assembly. The use of accessories that do notsatisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.