VIVIO Black Desk Riser Instruction Manual
- June 7, 2024
- VIVIO
Table of Contents
Black Desk Riser
Instruction Manual
SKU: DESK-V000VS
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/desk-v000vs
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com
Chat live with an agent!
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual and do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
PINCH POINT
DO NOT place hands on or near support bars. Moving parts can crush and cut.
Pinch points are created during lifting and lowering the worksurface.
Failure to follow these instructions may result in serious personal injury.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
TOOLS NEEDED
ASSEMBLY STEPS
STEP 1
Carefully remove the desktop (A) from the packaging.
WARNING: Impact Hazard! Moving Parts can Crush and Cut!
STEP 2
Flip the desktop (A) upside down, then attach the extended feet (B) to
the frame using M5x10mm screws (C).
STEP 3
Press the handle on the side and lift the desktop (A).
STEP
4
Mount brackets (D) to keyboard tray (G) using M5x10mm screws (C).
STEP
5
Hang assembled keyboard tray onto pre-installed knobs, and tighten knobs to
secure.
NOTE: Make sure the keyboard brackets are curving towards the user, not
towards the inside of the desk.
STEP
6
Place monitor, laptop and other items on desk surface.
STEP
7
Attach cable clip (E) to desk to manage keyboard and mouse cables.
STEP 8
Manage cables using zip ties (F).
STEP 9
If locks are not releasing properly to change desk height, adjust the position
of the black tube containing the steel release cable. Turn the nuts at the end
of the tube just behind the handle as shown, moving the tube away from the
handle until the cable once again has proper tension, then tighten the nuts.
CAUTION!
Keep monitor and laptop base fully on the desktop.
Follow the cable routing instructions to avoid the potential to
pinch cables.
Leave enough slack in cable to allow for full range of vertical
motion (15″/38 cm).
Raise desktop slowly to keep items stable.
Failure to follow these instructions may result in property damage and/or
personal injury.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 03/09/2021
REV2.1
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
www.vivo-us.com
Chat live with an agent!
AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESOLUTION TIME (within office hrs): 5M 4S
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- DESK-V000VS 32” Desk Converter – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>