VIVIO MOUNT-VP02W White Projector Ceiling Mount Instruction Manual
- June 3, 2024
- VIVIO
Table of Contents
White Projector Ceiling Mount
Instruction Manual
MOUNT-VP02W White Projector Ceiling Mount
SKU: MOUNT-VP02W
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/mount-vp02w
WARNING!
If you do not understand these directions, or if you have any doubts about
the safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR CEILING CONSTRUCTION. USE WOOD
STUDS
TO MOUNT. We include mounting for brick and concrete. If unsure, please
contact us at vivo-us.com, email at [email protected], or call us at 309-278-5303.
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
OPTION A: Run cables through arm (A).
OPTION B: If running cables through ceiling, pull cables through top
plate of arm (A).
STEP 2
OPTION A: Drywall Mounting
Use top plate of arm (A) to mark mounting holes on ceiling. Using a 3/16”
drill bit, drill approximately 2.2” into ceiling stud. Put arm (A) in place
and mount to the pre-drilled holes using bolts (W-A) and washers (W-C) as
shown in diagram.
STEP 2 (Continued)
OPTION B: Concrete/Brick Mounting
Use top plate of arm (A) to mark mounting holes on ceiling. Using a ⅜” drill
bit, drill approximately 2.4” into ceiling. Use concrete anchors (W-B), bolts
(W-A), and washers (W-C) to mount the arm (A) as shown in diagram. 
STEP 3
Mount bracket (B) to arm (A) using spacers (M-L), plates (M-M), bolts (M-I)and
washers (M-J, M-K). Tighten using allen key (M-N).
STEP 4
Adjust arms of the bracket (C) to fit the mounting holes of your projector.
Use bolts (M-A, M-B, M-C, M-D) and washers (M-E, M-F, M-G, M-H) depending on
the size of mounting holes in your projector.
STEP 5
Hook the mount (B) to bolts in bottom of mount (A). Secure using bolts (M-I)
and washers (M-J, M-K) as shown in diagram. Tighten using allen key (M-N).
STEP 6
Adjust height and tilt of mount using allen key (M-N).
** Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 07/28/2021 REV1**
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
[email protected]
AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Extending Projector Ceiling Mount – VIVO - desk solutions, screen mounting, and more