iTORCH ER20 Portable Magnetic Charging Rechargeable Flashlight User Manual

ERE0
EE
Portable
Magnetic Charging
Rechargeable Flashlight

Specifications

• LED: CREE XPL HD, up to 50,000 hours lifetime
• Output: max 1000 lumen
• Reflector. precise metal filmed
• Glass: AR coated &high light transmission glass
• Modes: Turbo-High-Medium-Low-Strobe-SOS
•  Working Voltage: 2.0V-4.2V
• Compatible Batteries: 116340 0r 1 CR123A
• Material: Aerospace Aluminum All0y 6061-T6, HA-Al military hard anodizing
• Switch side switch
• Dimensions. 21(Head&Body)L70.5mm
• NW: 49.5g(without battery)
• G.W: 163g
• Accessories Included: 1magnetic charging cable, 116340 battery with USB port, 1 holster, 1clip, 10- ring, 2screws

ANSI Chart

FL1 STANDARD| TURBO| HIGH| MEDIUM| LOW| STROBE|

SOS

---|---|---|---|---|---|---
Output| 1000LM| 400LM| 6OLM| 2LM| 1000LM| 1000LM
Runtime| 45min| 2h| 12h| 150h| 1.5h|
Max light intensity| 4,500cd
Max Range| 150m
Impact Resistance| 1m
Waterproof Rating| IPX-8

Note : all data above were generated in the Fitorch lab.
Differences may happen base on usage and conditions.

Operation

• Battery Load
  insert the 116340/1CR123A into the housing of ER2O

• On/Off
  With the light unlocked, click the side switch to turn on/off.

• Mode change
  when power is on, press the side switch for 0.5s to cycle through Turbo-High- Medium-Low-Medium-High- Turbo

• Strobe & SOS
  With the light unlocked and when power off, double click the side switch to enter strobe, double click again to SOS.
  When powering on, double click the side switch in any mode to enter Turbo– (double click) Strobe – (double click) SOS

• Low Mode
  When power off, press the side switch for 0. 5s to Low Mode

• Memory Function
  When power off, click the side switch to enter the model of last using

• Lock & Unlock
  When power off, click the side switch 5 times in succession to lock the switch(the light will blink to indicate locked status). And then click the switch 3 times in succession to unlock the switch

• Power Detection
  When power off, click the side switch 3 times in succession to enter power detection. the lamp under the side switch button will blink In Green and Red, one Green blink Indicates 1V, one Red blink Indicates In 0,1V, for Instance, 3.8V, 3 Green blinks, and 8 red blinks.

• Beacon Function
  When power off, click the side switch 4 times in succession to enter the beacon function.

• Magnetic Charging
  Connect the US8 port of the cable to any power source, and then hold the other end of the cable close to the charging port on the flashlight.

Store and Maintenance

• Disassembling the sealed head will damage the lights and void the warranty
• High-quality batteries are recommended
• O-ring will be worn after a Long-term use, change it In included spare one to maintain a watertight seal unload the batteries if assured the torch won’t use a bit of
• long time, then better put It into the Inner box
• Store and keep the torch off fee, statics, steaming, and humidity surroundings
• Clean the body with soft fabric clothing then lubricate In silicon grease per half a year.
• Periodic cleaning of batteries contacts to improve the flashlight performance as dirty contacts cause the lamp flicking, shine intermittently or even fail to illuminate for the below factors.
  A: Battery needs replacing ( choose the battery which mentions in this manual)
  B: PCB, Spring, or other contacts is dirty (clean the contacts In cotton swab In soaked rubbing alcohol)

WARNING!
Looking at the light for a long time will harm your eyes.

Warranty

F[TORCH guarantees: this torch is found to be defective on function under normal use within5 years from the purchase date, will be repaired or replaced with any charge

Warranty

• Please contact your original F[TORCH dealer for replacement and repairs.
• If the warranty issue cannot be resolved by the dealer, please contact
• FITORCH at [email protected] for assistance
  Please provide the following information to expedite the process
  1)List the serial number on the light.

2. Include a detailed description identifying the issue, accompanied by pictures or a short video demonstration if necessary
   3)Provide the name and store of the dealer you made the purchase from; and a copy of the proof of purchase.

Facebook| Website
---|---

[@fitorchstore](http://@fitorchstore)

| http://www.fitorchworld.com/

Shenzhen Fitorch Electronics Technology Co., Ltd
Office Address:6F, Longsheng Commercial Building
Dalang St, Longhua new district
Shenzhen City, China
Tel: +86-755-2101-3606
Web: www.fitorchworld.com
E-mail: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>