iTORCH Rechargeable & Sensor Headlamp HS1R User Manual
- June 6, 2024
- iTORCH
Table of Contents
iTORCH Rechargeable & Sensor Headlamp HS1R User Manual
Specifications
- Material: ABS
- LED: CREE XPG LED
- Max Output: 200 LM
- Working Voltage: 3.0V-4.2V
- Built-in Battery: a lithium-polymer rechargeable battery
- Waterproof: IPX 6
- N.W.: 43g
- G.W.: 85g Dimensions: 60×35×32 mm
- Warranty: 2 years
ANSI Chart
| F L 1 STANDARD | HIGH | MEDIUM | LOW | SOS |
|---|---|---|---|---|
| Output (lumens) | 200LM | 85LM | 25LM | 200LM |
| Runtime (hours) | 2.5h | 5h | 15h | 2.5h |
| Intensity (cd) | 550cd | |||
| Beam distance(meters) | 80m | |||
| Impact Resistance (meters) | lm | |||
| Waterproof | IPX-6 |
Note: all datas above were generated in Fitorch lab. Differences may happen base on usage and conditions.
Operations
-
Standard Mode
- Click the to reach high mode, and then click again to enter Medium.
- HS-1R will be lighted as : High-Medium-Low Off.
- Hold the button for 2S to enter into SOS.
-
Motion Sensor Mode
Click the to activate motion sensor mode. Wave your hand (the optimal distance is 5-15cm) to make the lamp off or on. When the lamp is off, the indicator light on right will be blue.
How to Charge
- Remove the rubber cover, and then use a USB cable to connect with the charging port on the lamp.
- The indicator light on left will be red during charging, and then change to green when charging complete.
- Note: When the light of headlamp is dim, please recharge the battery immediately.
Usage and Maintenance
- It is recommended to fully charge the battery before using the headlamp.
- To prolong the battery lifetime, it is best to recharge the battery BEFORE it is fully dischared.
- Avoid using this headlamp in extreme temperatures. § DO NOT attempt to open the battery compartment as this could damage the unit and will make the warranty invalid.
WARNING!
Looking at the light for a long time will harm your eyes.
Warrnraty
FITORCH guarantees: this headlamp is found to be defective on function under normal use within 2 years from the purchase date, will be repaired or replaced with any charge.
Warranty Procedure
- Please contact your original FITORCH dealer for replacement and repairs.
- If the warranty issue cannot be resolved by the dealer, please contact
- FITORCH at [email protected] for assistance. Please provide the following information to expedite the process:
- List the serial number on the light.
- Include a detailed description identifying the issue, accompanied by pictures or a short video demonstration if necessary.
- Provide the name and store of the dealer you made the purchase from; and a copy of the proof of purchase.
Facebook
Website
Web: www.fitorchworld.com
ShenZhen Fitorch Electronics Technology Co., Ltd
Office Address:6F, Longsheng Commercial Building
Dalang St, Longhua new district
ShenZhen City, China
Tel: +86-755-2101-3606
Web: www.fitorchworld.com
E-mail: [email protected]