iTORCH HS2R USB Rechargeable Motion Sensor User Manual
- June 3, 2024
- iTORCH
Table of Contents
iTORCH HS2R USB Rechargeable Motion Sensor
Specifications
- Material: Aluminum+ABS
- LED: CREE XML-T6 LED
- Max Output: 500 LM
- Working Voltage: 3.0V-4.2V
- Battery: 1 18650/21700, or 3 AAA battery(with battery bracket
- Waterproof: I PX 6
- N.W.: 75.6g(without battery)
- G.W.: 220g
- Dimensions: 85.8mm 38.2mm 31.5mm
- Warranty: 2 years
ANSI Chart
FL 1 STANDARD
|
Main Light(Spotlight)
---|---
Output(LM)
|
HIGH
| MEDIUM| LOW| STROBE| SOS|
BEACON
500LM
| 180LM| 100LM| 500LM| 500LM|
500LM
Runtime(H)
|
3h
| 10h| 16h| –| –|
–
FL 1 STANDARD
|
COB Light(Floodlight)
Output(LM)
|
HIGH
| LOW| RED|
RED STROBE
40LM
| 6LM| –|
–
Runtime(H)
|
28h
| 60h| –|
–
Intensity
|
980cd
Beam distance
|
100m
Impact Resistance
|
1m
Waterproof
|
IPX-6
Note: all datas above were generated in Fitorch lab.
Differences may happen base on usage and conditions.
Operations
Standard Mode
- Click to reach high mode, and then click again to enter Medium.
- HS-2R will be lighted as: High-Medium-Low-High (COB) Low (COB)-Red-Red strobe-Off.
- Double click the button at an1y time to enter White Strobe, and then double click then double click again to enter
White SOS, double click again to enter White Beacon.
Motion Sensor Mode
Click to activate the lamp, and then hold the button for 2S to enter motion sensor mode. The first indicator light will be red, and the other 4 lights will keep green. Wave your hand (the optimal distance is 5-15cm) to make the lamp off or on.
How to Charge
- Remove the rubber cover, and then use a USS cable to connect with the charging port on the lamp.
- The fourth and fifth indicator lights will blink green during charing, and then change to stable green when charging complete.
- Note: When the light of headlamp is dim, please recharge the battery immediately.
Usage and Maintenance
- It is recommended to fully charge the battery before using the headlamp.
- To prolong the battery lifetime, it is best to recharge the battery BEFORE it is fully dischared.
- Avoid using this headlamp in extreme temperatures.
- DO NOT attempt to open the battery compartment as this could damage the unit and will make the warranty invalid.
WARNING!
Looking at the light for a long time will harm your eyes.
Warranty
FITORCH guarantees: this headlamp is found to be defective on function under normal use within 2 years from the purchase date, will be repaired or replaced with any charge.
Warranty Procedure
- Please contact your original FITORCH dealer for replacement and repairs.
- If the warranty issue cannot be resolved by the dealer, please contact
- FITORCH at info@fitorchworld.com for assistance.
Please provide the following information to expedite the process:
- List the serial number on the light.
- Include a detailed description identifying the issue, accompanied by pictures or a short video demonstration if necessary.
- Provide the name and store of the dealer you made the purchase from; and a copy of the proof of purchase.
| 
Website
---|---
Tel: +86-755-2101-3606
Web: www.fitorchworld.com
E-mail: info@fitorchworld.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>