Frigidaire Refrigerator Manual: Stay Safe with Important Safety Information

The FRIGIDAIRE Refrigerator User Manual provides important safety information and guidelines to ensure the proper installation, use, and maintenance of the refrigerator. The manual begins with a warning to read all instructions before using the refrigerator and includes definitions for safety symbols used throughout the manual. The manual also emphasizes the importance of safety when using and disposing of the refrigerator, including avoiding storing flammable liquids or operating the refrigerator in the presence of explosive fumes. The installation checklist includes ensuring that the doors are secure, the refrigerator is level, and the electrical power is properly connected. The manual also provides guidelines for child safety and proper disposal of the refrigerator or freezer. Additionally, the manual includes instructions for cleaning and moving the refrigerator, as well as guidelines for installation clearances and leveling. Finally, the manual includes instructions for door removal and reversal for some models. Overall, this user manual provides essential information for safe and effective use of the FRIGIDAIRE Refrigerator.

FRIGIDAIRE Refrigerator

IMPORTANT SAFETY INFORMATION

WARNING
Please read all instructions before using this refrigerator.

Def nitions

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
IMPORTANT
IMPORTANT indicates installation, operation or maintenance information which is important but not hazard-related.
WARNING

WARNING! CALIFORNIA RESIDENTS Cancer and Reproductive Harm www.P65Warnings.ca.gov

For your Safety

• DO NOT store or use gasoline, or other flammable liquids in the vicinity of this or any other appliance. Read product labels for warnings regarding flammability and other hazards.
• DO NOT operate the refrigerator in the presence of explosive fumes.
• Avoid contact with any moving parts of automatic ice maker.
• Remove all staples from the carton. Staples can cause severe cuts, and also destroy finishes if they come in contact with other appliances or furniture.

Installation Checklist

Doors

• Handles are secure and tight
• Door seals completely to cabinet on all sides
• Freezer door is level across the top

Leveling

• Refrigerator is level, side-to-side and tilted ¼” (6mm) front-to-back
• toe grille is properly attached to refrigerator
• Cabinet is setting solid on all corners

Electrical Power

• House power turned on
• Refrigerator plugged in

Ice Maker

• House water supply connected to refrigerator
• No water leaks present at all connections
• recheck in 24 hours
• Ice maker is turned ON
• Ice & water dispenser operates correctly
• Front filter must be flush with filter housing (select models)

Final Checks

• Shipping material removed
• Fresh food and freezer temperatures set
• Crisper humidity controls set
• Registration card sent in

Child Safety

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Destroy or recycle the carton, plastic bags, and any exterior wrapping material immediately after the refrigerator is unpacked. Children should never use these items to play. Cartons covered with rugs, bedspreads, plastic sheets or stretch wrap may become airtight chambers, and can quickly cause suffocation.
Proper Disposal of your Refrigerator or Freezer
Risk of child entrapment Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators or freezers are still dangerous

• even if they will sit for “just a few days”. If you are getting rid of your old refrigerator or freezer, please follow the instructions below to help prevent accidents.

Proper Disposal of Refrigerators/Freezers
We strongly encourage responsible appliance recycling/disposal methods. Check with your utility company or visit www.energystar.gov/recycle for more information on recycling your old refrigerator.
Before you throw away your old refrigerator/ freezer:

• move doors.
• Leave shelves in place so children may not easily climb inside.
• Have refrigerant removed by a qualified service technician.

WARNING
These guidelines must be followed to ensure that safety mechanisms in this refrigerator will operate properly.

Electrical information

• The refrigerator must be plugged into its own dedicated 115 Volt, 60 Hz., 15 Amp, AC only electrical outlet. The power cord of the appliance is equipped with a three-prong grounding plug for your protection against electrical shock hazards. It must be plugged directly into a properly grounded three prong receptacle. The receptacle must be installed in accordance with local codes and ordinances. Consult a qualified electrician. Avoid connecting refrigerator to a Ground Fault Interrupter (GFI) circuit. Do not use an extension cord or adapter plug.
• If the power cord is damaged, it should be replaced by an authorized service technician to prevent any risk.
• Never unplug the refrigerator by pulling on the power cord. Always grip the plug firmly, and pull straight out from the receptacle to prevent damaging the power cord.
• Unplug the refrigerator before cleaning and before replacing a light bulb to avoid electrical shock.
• Performance may be affected if the voltage varies by 10% or more. Operating the refrigerator with insufficient power can damage the compressor. Such damage is not covered under your warranty.
• Do not plug the unit into an electrical outlet controlled by a wall switch or pull cord to prevent the refrigerator from being turned off accidentally.

IMPORTANT
Turning the Refrigerator controls to “0” will disable your refrigerator’s cooling system, but does not disconnect the power to the light bulb and other electrical components.
To turn off power to your refrigerator you
must unplug the power cord from the electrical outlet.
Grounding type wall receptacle CFC/HCFC Disposal
Your old refrigerator may have a cooling system that used CFCs or HCFCs (chlorofluorocarbons or hydrochlorofluorocarbons). CFCs and HCFCs are believed to harm stratospheric ozone if released to the atmosphere. Other refrigerants may also cause harm to the environment if released to the atmosphere. If you are throwing away your old refrigerator, make sure the refrigerant is removed for proper disposal by a qualified technician. If you intentionally release refrigerant, you may be subject to fines and imprisonment under provisions of environmental legislation.

FEATURES

Features may vary according to model

IMPORTANT

Cleaning your Refrigerator
Remove tape and glue residue from surfaces before turning on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Rinse with warm water and dry with a soft cloth. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. After you remove all of the package materials, clean the inside of your refrigerator before us-ing it. See the “Care & Cleaning” section in this manual. See important information about cleaning glass shelves and covers in the “Optional Features” section of this manual.
Moving your Refrigerator
Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to cover the floor with cardboard or hardboard to avoid floor damage. Always pull the refrigera- tor straight out when moving it. Do not wiggle or “walk” the refrigerator when trying to move it as floor damage could occur.

INSTALLATION

This Use & Care Guide provides general operating instructions for your model. Use the refrigerator only as instructed in this Use & Care Guide. Before starting the refrigerator,
follow these important first steps.

Location

• Choose a place that is near a grounded electrical outlet. Do Not use an extension cord or an adapter plug.
• If possible, place the refrigerator out of direct sunlight and away from the range, dishwasher or other heat sources.
• The refrigerator must be installed on a floor that is level and strong enough to support a fully loaded refrigerator.
• Consider water supply availability for models equipped with an automatic ice maker. If you do not hook up water to the refrigerator, remember to turn the ice maker off.

CAUTION
Do not install the refrigerator where the temperature will drop below 55°F (13°C) or rise above 110°F (43°C). The compressor will not be able to maintain proper tempera-tures inside the refrigerator.
Do not block the toe grille on the lower front of your refrigerator. Sufficient air circulation is essential for the proper operation of your refrigerator.
NOTE
For additional instructions on garage installation, refer to “Controls” section.

Installation clearances

• Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical connections:
  • Sides & Top:⅜ inch
  • Back:1 inch

NOTE
If your refrigerator is placed with the door hinge side against a wall, you may have to allow additional space for the handle so the door can be opened wider.

Guidelines for final positioning of your refrigerator:

• All four corners of the cabinet must rest firmly on the floor.
• The cabinet should be level at the front and rear.
• The sides should tilt ¼-inch (6 mm) from front-to-back (to ensure that doors close and seal properly).
• Doors should align with each other and be level.

To level the cabinet using the front rollers:

1. Remove the toe grille.
2. Use a flat-blade screwdriver or ⅜ inch socket wrench to raise or lower the front rollers (Figure 2). Do not raise the cabinet more than 9/16 inch.
3. Use adjustable wrench to adjust leveling screws. Lower the leveling screws on each side clockwise until they contact the floor (Figure 3). Do not raise the cabinet more than 9/16 inch.
   NOTE
   Raise the front of the refrigerator enough so the doors close freely when opened halfway. The refrigerator should slope ¼ inch to ½ inch from front-to- back. Then level the refrigerator from side-to-side.

DOOR REMOVAL/REVERSAL INSTRUCTIONS (SOME MODELS)

NOTE
The direction in which your refrigerator doors open (door swing) can be reversed, from left to right or right to left, by moving the door hinges from one side to the other. Reversing the door swing should be performed by a qualified person.
IMPORTANT
Before you begin, turn the refrigerator temperature control to “0” and remove the electrical power cord from the wall outlet. Re-move any food from door shelves.

Door removal and reversal instructions:

1. Remove toe grille.

2. Remove top hinge cover. Trace around the hinge with a soft lead pencil. This makes reinstallation easier. Remove top hinge and lift door off center hinge pin. Set door aside.

3. Unscrew center hinge pin using adjustable wrench and save for reassembly. Ensure plastic washer stays on hinge pin.

4. Lift refrigerator door off of bottom hinge and set aside.

5. Remove center hinge and shim by removing inside screw and loosening two outside screws enough to allow hinge and shim to slide out. Tighten screws.

6. Loosen two outside screws on opposite side of refrigerator, remove inside screw and install center hinge.

7. Remove two screws on bottom hinge with ⅜” socket wrench.

8. Install bottom hinge on opposite side with the two screws removed from step 7.

9. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin to other hole in hinge and tighten with adjustable wrench.

10. Reverse door handles (see instruction on next page).

11. Move freezer and refrigerator door stops to opposite side. Before starting screws, use an awl to puncture the foam.

12. Position refrigerator door onto bottom hinge pin and screw center hinge pin through center hinge into top of door. Close refrigerator door to help align hinge hole.

13. Tighten center hinge pin with adjustable wrench.

14. Remove cabinet and hinge hole plugs and move to opposite side.

15. Lower freezer door onto center hinge pin.

16. Close freezer door. Lift up on handle side of door and grasp the thinnest part of the top hinge cover (which was removed in Step 2) and insert the thickest part between the doors on the handle side approximately 3 inches from the outside edge. This will ensure proper spacing.

17. Tighten the top hinge screws and check door gasket for open seal condition (gap between gasket and cabinet flange).

18. Should open seal condition exist, try to massage the gasket to make sure it is seated into the channel.
    IMPORTANT
    If the condition still exists, try heating the gasket with a hair dryer with the door closed. Use Caution and be careful not to damage the interior door panel or gasket by applying too much heat.

19. If the open seal condition still exists, it may be necessary to flip the gasket. In this case, remove the gasket from the door by pulling it out. Rotate the gasket half a turn (180 degrees). Reinstall the gasket by inserting the corners first then work towards the middle assuring that it is fully seated in the channel.

20. Flip toe grille and reinstall.

21. Plug in electrical power cord and turn refrigerator temperature control to center position. Adjust setting as necessary.

DOOR HANDLE INSTALLATION

CAUTION
Wear gloves and use extreme CAUTION when installing these handles. The rounded end of the handles may be sharp.
IMPORTANT
To ensure proper installation of handles, please review these instructions and illustra-tions thoroughly prior to installing the handles. Additionally, before installing the door han-dles, make sure the door swing is correct. Your model will have either a right hand or left hand door swing. Follow instructions in the Use & Care Guide to reverse the doors, if necessary.
To attach metal refrigerator handle

1. Place rounded part of handle onto shoulder screw on face of door and align the two holes in top of handle with the two holes in top of door. Do not tighten the set screw yet.
2. Install the two screws into the top of the handle.
3. Tighten the set screw on the rounded part of the handle until the handle is flush with the door, then tighten another ½ turn.

To attach metal freezer handle:

1. Place rounded part of handle onto shoulder screw on face of door and align the two holes in bottom of handle with the two holes in bottom of door. Do not tighten the set screw yet.
2. Install the two screws into the bottom of the handle.
3. Tighten the set screw on the rounded part of the handle until the handle is flush with the door, then tighten another ½ turn.

Stainless Steel Models

To reverse metal refrigerator/freezer handles:
Handles may be easier to reverse while doors are off. Reverse freezer and refrigerator handles as shown.
CAUTION
Be sure doors are set aside in a secure position where they cannot fall and cause personal injury.
CAUTION
Do not use an electric screwdriver to attach handles; overtightening handles may crack them. Use a handheld screwdriver only.

To attach plastic refrigerator handle

1. With the door open, place the end of the handle on the dove tail mounting screw and pull down to secure in place.
2. Align handle base with holes in top of door.
3. Install screws packaged with the handle.

To attach plastic freezer handle:

1. With the door open, place the end of the handle on the dove tail mounting screw and push up to secure in place.
2. Align handle base with holes in bottom of door.
3. Install screws packaged with the handle.

WATER SUPPLY CONNECTION

WARNING

To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator from electrical power before connecting a water supply line to the refrigerator.

CAUTION
To Avoid Property Damage:

• Copper or Stainless Steel braided tubing is recommended for the water supply line. Water supply tubing made of ¼ inch plastic is not recommended to be used. Plastic tubing greatly increases the potential for water leaks, and the manufacturer will not be responsible for any damage if plastic tubing is used for the supply line.
• DO NOT install water supply tubing in areas where temperatures fall below freezing.
• Chemicals from a malfunctioning softener can damage the ice maker. If the ice maker is connected to soft water, ensure that the softener is maintained and working properly.

IMPORTANT
Ensure that your water supply line connec-tions comply with all local plumbing codes.
Before Installing The Water Supply Line, You Will Need:

• Basic Tools: adjustable wrench, flat-blade screwdriver, and PhillipsTM screwdriver
• Access to a household cold water line with water pressure between 30 and 100 psi.
• A water supply line made of ¼ inch (6.4 mm) OD, copper or stainless steel tubing. To determine the length of tubing needed, measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).
• A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type shutoff valve.
• Do not re-use compression fitting or use thread seal tape.
•  A compression nut and ferrule (sleeve) for connecting a copper water supply line to the ice maker inlet valve.
  

NOTE
Check with your local building authority for recommendations on water lines and associated materials prior to installing your new refrigerator. Depending on your local/state building codes, Frigidaire recommends for homes with existing valves its Smart Choice® water line kit 5305513409 (with a 6 ft. Stainless Steel Water Line) and for homes without an existing valve, Frigidaire recommends its Smart Choice® water line kit 5305510264 (with a 20 ft. Copper Water Line with self-tapping saddle valve). Please refer to www.frigidaire.com/store for more information.

To Connect Water Supply Line To Ice Maker Inlet Valve **

**

1. Disconnect refrigerator from electric power source.
2. Place end of water supply line into sink or bucket. Turn ON water supply and flush supply line until water is clear. Turn OFF water supply at shutoff valve.
3. Remove plastic cap from water valve inlet and discard cap.
4. If you use copper tubing – Slide brass compression nut, then ferrule (sleeve) onto water supply line. Push water supply line into water valve inlet as far as it will go (¼ inch / 6.4 mm). Slide ferrule (sleeve) into valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten. See Figure 1.  If you use braided flexible stainless steel tubing – The nut is already assembled on the tubing. Slide nut onto valve inlet and finger tighten nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten. See Figure2
5. With steel clamp and screw, secure water supply line (copper tubing only) to rear panel of refrigerator as shown.
6. Coil excess water supply line (copper tubing only), about 2½ turns, behind refrigerator as shown and arrange coils so they do not vibrate or wear against any other surface.
7. Turn ON water supply at shutoff valve and tighten any connections that leak.
8. Reconnect refrigerator to electrical power source.
9. To turn ice maker on, lower wire signal arm (side mounted) or set the ice maker’s On/Off power switch to the “I” position (rear mounted).
   NOTE
   These instructions do not cover after market ice maker installation. Instructions in after market ice maker kit should be used.

ICE SERVICE

If your refrigerator has an automatic ice maker, minimal ice will be produced during the first 24 hours of operation. Air in new plumbing lines may cause the ice maker to cycle two or three times before making a full tray of ice. With no usage, it will take approximately one to two days to fill the ice container. New plumbing connections may cause the first production of ice cubes to be discolored or have an odd flavor. Discard ice made during the first 24 hours.
NOTE
Automatic ice makers are also optional accessories that may be installed in most models at any time. Call your local dealer for information.

Turning your Ice Maker On
After the plumbing connections have been completed, the water supply valve must be opened. Place the ice container under the ice maker, pushing it as far back as possible. Lower the wire signal arm to its “down” or ON position.
Turning your Ice Maker Off
To stop the ice maker, lift the wire signal arm until it clicks and locks in the “up” or OFF position. The ice maker also turns off automatically when the ice container is full. IMPORTANT
Your ice maker is shipped from the factory with the wire signal arm in the ON position. To ensure proper function for your ice maker, hook up water supply immediately or turn ice maker OFF by lifting the wire signal arm until it clicks and locks in the UP position. If the ice maker is on and the water supply is not connected, the water valve will make a loud chattering noise.

ICE PRODUCTION: WHAT TO EXPECT
The ice maker will produce 2.5 to 3 pounds of ice every 24 hours depending on usage conditions. Ice is produced at a rate of 8 cubes every 80 to 160 minutes.
CAUTION
Do Not place the ice container in your dishwasher.

CONTROLS AND SETTINGS

Cool Down Period
To ensure safe food storage, allow the refrigerator to operate with the doors closed for at least 8 hours before loading it with food.

Refrigerator & Freezer Controls

NOTE
When first turning refrigerator on, adjust control to recommended. This is the recom-mended initial setting. After 24 hours, adjust the controls as needed.

IMPORTANT
Adjusting the refrigerator temperature control to “0” turns off the compressor and prevents the refrigerator from cooling, but does not dis- connect the power to the light bulb and other electrical components. To turn off power to your refrigerator, you must unplug the power cord from the wall outlet.

Temperature Adjustment

• Adjust temperature gradually: adjust the knob in small increments, allowing the temperature to stabilize.
• For colder temperatures, adjust the knob towards coldest.
• For warmer temperatures, adjust the knob towards cold.

Adjusting the refrigerator control will change temperatures in both compartments. The auxiliary freezer control can be left at the factory pre-set (mid position) or adjusted as desired; it has no effect on electrical power to the refrigerator.
To maintain temperatures, a fan circulates air in the refrigerator and freezer compartments. For good circulation, do not block cold air vents with food items.

CAUTION
Do not install the refrigerator where the temperature will drop below 55°F (13°C) or rise above 110°F (43°C). The compressor will not be able to maintain proper temperatures inside the refrigerator.
IMPORTANT
If you install your refrigerator in a garage or other unheated area, you may experience freezer temperature problems during the winter months when temperatures dip below 55° F.
Upgrading your refrigerator with a Garage Kit will lower the minimum operating temperature of your unit to 34° F. This kit can be ordered by calling the phone number listed at the bottom of the warranty page or back cover at an additional cost.

STORAGE FEATURES

CAUTION
Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use both hands when removing them to avoid dropping.
CAUTION
To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change.

Shelf Adjustment

Refrigerator shelves are easily adjusted to suit individual needs. Before adjusting the shelves, remove all food.
To adjust sliding shelves:

1. Remove shelf by pulling forward to stop position.
2. Lift front edge up and pull out.

To replace shelf, rest side edges on any pair of shelf rails and

carefully push shelf back into position.
Door storage

Door bins, shelves, and racks are provided for convenient storage of jars, bottles, and cans.
Frequently used items can be quickly selected.
The dairy compartment, which is warmer than the general food storage section, is intended for short term storage of cheese, spreads, or butter.
Door rack
Some models have door racks or bins that can accommodate gallon-sized plastic drink containers and economy-sized jars and containers.
To remove door rack:

1. Push on rack sides to release from locking tabs.
2. Pull straight out.

To install door rack:

1. Push rack straight ahead.
2. You will hear the sides lock into the tabs.

STORAGE FEATURES

Crisper Humidity Control (some models)
The crisper humidity control, present on the crisper drawers of some models, allows you to adjust the humidity within the crisper. This can extend the life of fresh vegetables that keep best in high humidity.
NOTE
Leafy vegetables keep best when stored with the Humidity Control set on High Humidity, or in a drawer without a Humid-ity Control. This keeps incoming air to a minimum and maintains maximum moisture content. Store non-leafy vegetables and fruits still in their skins at the low humidity setting.

Crispers (some models)
The crispers, located under the bottom refrigerator shelf, are designed for storing fruits, vegetables, and other fresh produce. Wash items in clear water and remove excess water before placing them in the crispers. Items with strong odors or high moisture content should be wrapped before storing.

NORMAL OPERATING SOUNDS

Understanding the sounds you may hear

Your new, high-efficiency refrigerator may introduce unfamiliar sounds. These sounds normally indicate your refrigerator is operating correctly. Some surfaces on floors, walls, and kitchen cabinets may make these sounds more noticeable.
NOTE
Rigid foam insulation is very energy efficient, but is not a sound insulator.Following is a list of major components in your refrigerator and the sounds they can cause:

1. Evaporator Refrigerant through the evaporator may create a boiling or gurgling sound.

2. Evaporator fan You may hear air being forced through the refrigerator by the evaporator fan.

3. Defrost heater During defrost cycles, water dripping onto the defrost heater may cause a hissing or sizzling sound. After defrosting, a popping sound may occur.
   IMPORTANT
   During the automatic defrost cycle, you may notice a red glow in the vents on the back wall of your freezer compartment. This is normal during the defrost cycle.

4. Automatic ice maker When ice has been produced, you will hear ice cubes falling into the ice bin.

5. Automatic Defrost control These parts can produce a snapping or clicking sound when turning the cooling system on and off.

6. Condenser fan You may hear air being  forced through the condenser.

7. Compressor Modern, high-efficiency compressors run much faster than in the past. The compressor may have a high-pitched hum or pulsating sound.

8. Water valve If your refrigerator is equipped with an automatic ice maker, you will hear a buzzing sound as the water valve opens to fill the ice maker during each cycle.

9. Drain pan (not removable) You may hear water dripping into the drain pan during the defrost cycle.

10. Condenser May create minimal sounds from forced air.

CARE AND CLEANING

Protecting your investment

Keeping your refrigerator clean maintains appearance and prevents odor build- up. Wipe up any spills immediately and clean the freezer and fresh food compartments at least twice a year. When cleaning, take the following precautions:

• Never use CHLORIDE or cleaners with bleach to clean stainless steel.
• Do not wash any removable parts in a dishwasher.
• Always unplug the electrical power cord from the wall outlet before cleaning.
• Remove adhesive labels by hand. Do not use razor blades or other sharp instruments which can scratch the appliance surface.
• Do not remove the serial plate.

Do not use abrasive cleaners such as window sprays, scouring cleansers, brushes, flammable fluids, cleaning waxes, con  centrated detergents, bleaches or cleansers containing petroleum products on plastic parts, interior doors, gaskets or cabinet liners. Do not use paper towels, metallic scouring pads, or other abrasive cleaning materials or strong alkaline solutions.
NOTE
If you set your temperature controls to turn off cooling, power to lights and other electrical components will continue until you unplug the power cord from the wall outle.
CAUTION

• Pull the refrigerator straight out to move it. Shifting it from side to side may damage flooring. Be careful not to move the refrigerator beyond the plumbing connections.
• Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or damp hands.
  IMPORTANT
  If you store or move your refrigerator in freezing temperatures, be sure to completely drain the water supply system. Failure to do so could result in water leaks when the refrigerator is put back into service. Contact a service representative to perform this operation.

CARE AND CLEANING

Care & Cleaning Tips

Part| What To Use| Tips and Precautions
Interior & Door Liners| •   Soap and water

•   Baking soda and water

| Use 2 tablespoons of baking soda in 1 quart of warm water. Be sure to wring excess water out of sponge or cloth before cleaning around controls, light bulb or any electrical part.
Door Gaskets| •   Soap and water| Wipe gaskets with a clean soft cloth.
Drawers & Bins| •   Soap and water| Use a soft cloth to clean drawer runners and tracks.
Glass Shelves| •   Soap and water

•   Glass cleaner

•   Mild liquid sprays

| Allow glass to warm to room temperature before immersing in warm water.
Toe Grille| •   Soap and water

•   Mild liquid sprays

•   Vacuum attachment

| Vacuum dust from front of toe grille. Remove toe grille (see Installation Instructions). Vacuum backside, wipe with sudsy cloth or sponge. Rinse and dry.
Exterior & Handles| •   Soap and water

•   Non Abrasive Glass Cleaner

| Do not use commercial household cleaners containing ammonia, bleach or alcohol to clean handles. Use a soft cloth to clean smooth handles. DO NOT use a dry cloth to clean smooth doors.
Exterior & Handles

(Stainless Steel Models Only)

| •   Soap and water

•   Stainless Steel Cleaners

| Never use CHLORIDE or cleaners with bleach to clean stainless steel.

Clean stainless steel front and handles with non- abrasive soapy water and a dishcloth. Rinse with clean water and a soft cloth. Use a non-abrasive stainless steel cleaner. These cleaners can be purchased at most home improvement or major department stores. Always follow manufacturer’s instructions. Do not use household cleaners containing ammonia or bleach.

NOTE: Always clean, wipe and dry with the grain to prevent scratching. Wash the rest of the cabinet with warm water and mild liquid detergent. Rinse well, and wipe dry with a clean soft cloth.

Replacing Light Bulbs| •   Unplug refrigerator

•   Wear gloves

•   Remove light cover (some models)

•   Replace old bulb

•   Replace light cover (some models)

•   Plug in the refrigerator

| CAUTION : Wear gloves when replacing light bulbs to avoid getting cut. Use same wattage when replacing bulb

TROUBLESHOOTING

Common Occurrences| Before calling for service, review this list. It may save you time and expense. This list includes common occurrences that are not the result of defective workmanship or materials in this appliance.
---|---
Refrigerator does not run.| •   Ensure plug is tightly pushed into electrical outlet.

•   Check/replace fuse with a 15 amp time-delay fuse. Reset circuit breaker.

•   The refrigerator/freezer control is turned to “0”

•   Refrigerator may be in defrost cycle. Wait 20 minutes and check again.

Freezer temperature is colder than preferred. Refrigerator temperature is satisfactory.| •   Set auxiliary freezer control to a warmer setting until freezer temperature is satisfactory. Allow 24 hours for the temperature to stabilize.
Refrigerator temperature is too cold. Freezer temperature is satisfactory.| • Set refrigerator/freezer control to a warmer setting. Allow 24 hours for temperature to stabilize. Then check freezer temperatures and adjust as needed.
Freezer temperature is warmer than preferred. Refrigerator temperature is satisfactory.| •   Set auxiliary freezer control to a colder setting until freezer temperature is satisfactory. Allow 24 hours for the temperature to stabilize.
Refrigerator temperature is too warm. Freezer temperature is satisfactory.| • Set refrigerator/freezer control to a colder setting. Allow 24 hours for temperature to stabilize. Then check refrigerator temperatures and adjust as needed.
Refrigerator is noisy or vibrates.| •   The cabinet is not level.

•   Floor is weak.

•   See Normal Operating Sounds and Sights section.

Odors in refrigerator.| •   Interior needs to be cleaned.

•   Foods that produce odors should be covered or wrapped.

Cabinet light not working.| •   Replace light bulb.

•   Ensure plug is tightly pushed into electrical outlet.

•   Light switch may be stuck. Push in light switch, located on the refrigerator control box, to release.

Automatic ice maker not working (some models)| •   Ensure the wire signal arm is not in UP position.

•   Ice maker should produce 2.5 to 3 pounds of ice in a 24 hour period.

•   Water supply is turned off.

•   Water pressure is too low.

•   The freezer is not cold enough.

LIMITED WARRANTY

Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.
Exclusions
This warranty does not cover the following:

1. Products with original serial numbers that have been removed, altered or cannot be readily determined.
2. Product that has been transferred from its original owner to another party or removed outside the USA or Canada.
3. Rust on the interior or exterior of the unit.
4. Products purchased “as-is” are not covered by this warranty.
5. Food loss due to any refrigerator or freezer failures.
6. Products used in a commercial setting.
7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances not in ordinary household use or used other than in accordance with the provided instructions.
8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.
9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc., which are not a part of the appliance when it is shipped from the factory.
10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or knobs, handles, or other cosmetic parts.
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service calls to remote areas, including the state of Alaska.
12. Damages to the finish of appliance or home incurred during installation, including but not limited to floors, cabinets, walls, etc.
13. Damages caused by: services performed by unauthorized service companies; use of parts other than genuine Electrolux parts or parts obtained from persons other than authorized service companies; or external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
If You Need Service
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty
period should service be required. If service is performed, it is in your best interest to obtain and
keep all receipts. Service under this warranty must be obtained by contacting Electrolux at the addresses or phone numbers below.
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp. Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and parts under this warranty must be performed by Electrolux or an authorized service company. Product features or specifications as described or illustrated are subject to change without notice.

SPECIFICATIONS

Manufacturer

|

Frigidaire

---|---

Model

|

Refrigerator

Safety Information

|

Provides important safety information and guidelines for installation, use, and maintenance of the refrigerator

Installation Checklist

|

Includes ensuring secure doors, level refrigerator, and proper electrical power connection

Child Safety

|

Not intended for use by children or persons with reduced physical, sensory or mental capabilities without supervision or instruction

Disposal

|

Provides guidelines for proper disposal of refrigerator or freezer to prevent accidents

Features

|

May vary according to model

Cleaning

|

Provides instructions for cleaning and removing tape and glue residue from surfaces

Moving

|

Provides instructions for moving refrigerator without causing floor damage

Installation

|

Provides general operating instructions and guidelines for installation location, clearances, and positioning

FAQS

Is Frigidaire a reliable refrigerator?

Frigidaire refrigerators are no different; designed with interior storage capacity configuration options, Smudge-Proof Stainless Steel, and easy access with adjustable shelving. Frigidaire series refrigerators are reliable, dependable appliances built to save families’ time.

How long do Frigidaire refrigerators last?

Depending on model and size, a properly maintained refrigerator can last between 14 and 17 years. A standard refrigerator can run up to 17 years on average, while a compact refrigerator can run for 14 years.

Are there any recalls on Frigidaire refrigerators?

This recall involves 13 models of Frigidaire refrigerators and one Electrolux model refrigerator. The refrigerators all feature an ice maker and come in stainless steel, white and black.

Which refrigerators have the most problems?

According to service professionals and consumer reviews, LG, Samsung, and Frigidaire are the least reliable refrigerator brands.

Are GE and Frigidaire the same?

AB Electrolux of Sweden, the parent company of the U.S. brands Electrolux and Frigidaire, has purchased GE Appliances for $3.3 billion.

Which refrigerator brand has the least repairs?

From our research, the refrigerator brands that are the most reliable are LG, GE, Whirlpool and Samsung. It makes sense that these would be the same companies we listed as manufacturing the refrigerators with the fewest problems.

Is GE or Frigidaire better?

Frigidaire fridges tend to be more efficient with a smaller energy footprint, while GE fridges tend to consume more electricity every month. GE. Across the board, GE offers more choices than Frigidaire in terms of colors, smoother finishes, and hardware options.

What can you do with an old refrigerator?

Your local waste management division may offer heavy trash pick-up and recycling programs for appliances. Contact them directly for information. Talk to Your Local Scrap Metal Recycler. Thousands of local scrap metal recyclers can recycle old fridges and freezers.

Why is my Frigidaire fridge not cooling?

A Frigidaire refrigerator not cooling properly may have a dirty or damaged seal, allowing cold air to escape and warm air to enter. Assess the door seal for dirt and debris or signs of damage like rips or tears.

What is the first thing to check when refrigerator stops working?

The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge. Most homes have a dedicated 20-amp circuit for the fridge alone, while older homes may have it on a general kitchen circuit.

Where are the coils on a Frigidaire refrigerator?

For the Frigidaire refrigerator condenser coil location, you can find them located at the back of the fridge or across the bottom. In other models, such as a General Electric fridge, the GE side by side refrigerator coil location will be located near the compressor behind the refrigerator.

How often should refrigerator coils be cleaned?

To keep your refrigerator and freezer humming, you should clean coils every six months to a year, more often if you have shedding pets. It’s a short and easy task, and definitely one you shouldn’t avoid.

Do eggs need to be refrigerated?

In the United States, fresh, commercially produced eggs need to be refrigerated to minimize your risk of food poisoning. However, in many countries in Europe and around the world, it’s fine to keep eggs at room temperature for a few weeks.

Which is better single or double door fridge?

Unlike double door refrigerator, single door refrigerators consume less energy and are more energy efficient. On average, single door refrigerators consume 30-40% less power than double door refrigerators. Single door refrigerators use direct cooling technology, with natural convection.

What is the most popular refrigerator style?

LG refrigerators seem to make the most owners the happiest, at least among major-brand models, which usually cost less than $4,000. Whirlpool and GE are pretty good, too. Among the most popular fridge styles, the French-door design (with half-width fridge doors and a pull-out bottom freezer) is the most beloved type.

What should I do before using the refrigerator for the first time?

Before starting the refrigerator, remove all staples from the carton and clean the inside of the refrigerator.

Can I store flammable liquids near the refrigerator?

No, you should not store or use gasoline or other flammable liquids in the vicinity of this or any other appliance.

How do I ensure proper installation of the refrigerator?

Follow the installation checklist provided in the manual, which includes ensuring that the doors are secure, the refrigerator is level, and the electrical power is properly connected.

Can I operate the refrigerator in the presence of explosive fumes?

No, you should avoid operating the refrigerator in the presence of explosive fumes.

How should I dispose of my old refrigerator or freezer?

Follow the proper disposal guidelines provided in the manual, which includes moving doors, leaving shelves in place, and having refrigerant removed by a qualified service technician.

Can children use the packaging materials as toys?

No, children should never use cartons, plastic bags, or any exterior wrapping material to play.

How should I clean my refrigerator?

Remove tape and glue residue before turning on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Rinse with warm water and dry with a soft cloth.

How should I move my refrigerator for cleaning or service?

When moving the refrigerator, cover the floor with cardboard or hardboard to avoid floor damage. Always pull the refrigerator straight out when moving it.

What are the installation clearances for the refrigerator?

llow ⅜ inch on the sides and top and 1 inch on the back for ease of installation, proper air circulation, and plumbing and electrical connections.

Can I install the refrigerator where the temperature will drop below 55°F or rise above 110°F?

No, you should not install the refrigerator where the temperature will drop below 55°F or rise above 110°F.

VIDEO

www.frigidaire.com

References

• Recycle | ENERGY STAR
• Kitchen, Laundry, Home Appliances & Accessories | Frigidaire
• Frigidaire
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>