Geek Heat 1500W Retro Ceramic Heater Instruction Manual
- June 7, 2024
- Geek Heat
Table of Contents
Geek Heat 1500W Retro Ceramic Heater Instruction Manual
Specifications
Item No.
|
HCO3
---|---
Model No.
| PTC-159
Voltage
|
120V AC
Wattage
|
1500W at 25°C , 1650W at 0°C
Gross Weight
| 3. 82 lbs
Net Weight|
3.31 lbs
Product Dimensions
|
11.14 x 5.51 x 8.27 inch
IMPORTANT SAFETY INTRODUCTIONS
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to person, including the following:
- 1. Read all instructions before using this heater.
- This heater is hot when in use. To avoid bums, do not let bare skin touch hot surfaces. Use grip handle when provided.
- Keep combustible materials such as drapes, furniture, pillows, bedding, papers, clothes, and curtains at least three (3) feet (0.9m) from the front of heater and keep them at least 1 foot (0.3m) the sides and rear of the heater.
- Extreme caution is necessary when heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Always unplug heater when not in use.
- Do not use any heater with a damaged cord or plug or after the heater malfunctions or has been dropped or damaged in any manner. Retum heater to manufacturer for examination, electrical or mechanical adjustment, or repair. (See Warranty for information).
- Do not use outdoors.
- This heater is not to be used in bathrooms, laundry areas or other similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord away from traffic area where it will not be tripped over. To disconnect heater, turn control to OFF then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause electric shock or fire or damage the heater.
- To prevent possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or flammable liquids are used or stored.
- Use this heater only as directed in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- If the heater will not operate: See specific instructions in Safety Feature explained in this manual.
- This appliance is not intended for use by persons(including children)with reduced physical,sensory or mental capabilities.or lack of experience and knowledge,unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
OPERATING INSTRUCTIONS
PRE-OPERATING INSTRUCTIONS:
- Carefully remove your heater from the box (please save the carton for off-season storage).
- Make sure the unit is in the OFF position before plugging the heater into the outlet.
- Place heater on a firm level surface.
OPERATING INSTRUCTIONS:
- 1. Plug the power cord into a wall outlet (120V AC, 60Hz).
- Tum the Selector-Control Knob to desired heat setting(LOW for 750W or HI for 1500W)
- For fan-only operation,without any heat output,tum the selector control to the FAN setting.
- When the unit is turned on the power indicator light will illuminate to tell you that the heater is functioning.
THERMOSTAT INSTRUCTIONS:
Before setting the thermostat, allow the heater to operate and warm up the room.You need to set thermostat on High to start the heater. When the desired temperature/comfort level is reached,lower the thermostat setting until the fan/heater stops operating. Turning the knob clockwise will increase the temperature setting. The control will now automatically maintain the preset temperature level by turning the heater ON and OFF.The numerical reading on the dial of thermostat has no practical meaning, just for decoration only.
Note: It is normal for the heater to cycle ON and OFF as it maintains the preset temperature. prevent the unit from cycling,you need to change to change the thermostat setting.
AUTOMATIC OVERHEAT SAFETY CONTROL DEVICE:
This heater is equipped with a patented .technologically-advanced safety internal heat limiting thermostat and overheat protection circuit. When a potential overheat temperature is reached,the system will automatically shut the heater off.
CLEANING & MAINTENANCE
During Season Care:
- Before cleaning, be sure to turn off and unplug the heater.
- Carefully wipe the unit with a soft, damp cloth. Please be very cautious near the motor and heating elements.
- Do not immerse the heater in water.
- Never use gasoline, benzene or thinner. This will damage the surface of the heater.
- After cleaning, be sure to completely dry the unit with a cloth or towel.
After Season Care:
- Store heater in a cool and dry location with power cord properly secured.
- Please store the unit in its original carton or suitable container.
TROUBLESHOOTING
Problem
| Possible Cause|
CORRECTIVE ACTION
---|---|---
Your heater shuts off unexpectedly or fails to operate.|
- No electric power.
- One of the safety features may have activated to prevent overheating, including the tip-over safety switch and thermal overload protector.
|
-
Be sure the power cord is plugged
into a working electrical outlet. -
- Check your thermostat setting. The heater may be off because it has reached the desired temperature setting.
-
Unplug the heater and wait 10 minutes for the unit to cool down. After 10 minutes, plug the unit in again and operate normally.
LIMITED WARRANTY
HOME EASY LTD warrants to the original consumer or purchaser this Geek Heat Retro Ceramic Heater ( “Product” ) is free from defects in material or workmanship for a period of one (1) year from the date of purchase. If any such defect is discovered within the warranty period, HOME EASY LTD, at its discretion, will repair or replace the Product at no cost. This limited warranty is good only to the original purchaser of the product and effective only when used in United States.
For warranty or repair service: Call 1-844-801-8880 and choose the appropriate prompt, or email support@geektechnology.com. Please have your Product’s model number, your name, address, city, state, zip code and phone number ready.
NO OTHER WARRANTY IS APPLICABLE TO THIS PRODUCT.THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPERSS OR IMPLIED. INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW. IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS U.S.DISTRIBUTOR SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT.SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE. INCLUDING WITHOUT LIMITATION. LOST REVENUES OR PROFITS, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE, SOME STATES AND/OR TERRITORIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAG-ES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS. SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU .THIS WARRANTY GIVES YOU, THE ORIGINAN PURCHASER, SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE OR TERRITORY TO TERRITORY.
Home Easy Ltd.
1275 Bloomfield Ave
Fairfield, NJ 07004
Toll Free
1 844 801 8880
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>