AUTEL MaxiTPMS PAD User Guide
- June 7, 2024
- AUTEL
Table of Contents
Maxi TPMS PAD
TPMS SENSOR PROGRAMMING ACCESSORY DEVICE
Quick Start Guide
Autel MaxiTPMS Support: www.auteltech.com
Tel: 86-755-86147779 Email: sales@auteltech.com
Installing the PC Software
Ce dispositif est conforme à RSS-310 d’industrie Canada. L’opération est sujette à la condition que ce dispositif ne cause pas l’interférence nocive. Insert the CD that comes with this kit into the CD drive. In most cases the software will launch automatically for installation and all you need to do is to follow the instructions on the PC screen. If the software does not launch automatically, follow these steps:
- From the Start menu, click on My Computer.
- Locate the Removable Storage drive displays as MaxiTPMS PAD.
- Double click it to launch the auto-install process. The MaxiTPMS PAD program will launch automatically once successfully installed. The start screen will prompt you to connect the PAD to the PC.
Minimum Computer Requirements
- Laptop or PC with 100 MB of free disc space
- Windows XP, Vista or Version 7
- Available USB Port
- CD Drive
Connecting the PAD
Connect the PAD to the PC using the supplied USB cable. The MaxiTPMS PAD program will always prompt you to connect the PAD before letting you start the process.
nnect Type A plug to the PC.
Connect Type B plug to the PAD.
Indications of the Working Status
Power-on – Illuminates solid green light
Successful read or program – illuminates green light with quick beeps
Failed read or program – Illuminates red light with a long beep
Sensor Communication
Wireless Communication – Place the sensor on the PAD in the area marked by lines
Launching MaxiTPMS PAD Software
Click on All Programs from Windows Start Menu, locate and click on MaxiTPMS PAD to start the program. If you haven’t already, connect your PAD to your PC.
Software Operation
Select the vehicle manufacturer from the Car Brand menu. Then select the model
and year from the menu list that follows that click.
You will now be ready to do one of these three operations:
- Test Sensor – Click the Test Sensor button. Place the OE sensor on the PAD. Click TEST to activate the sensor.
- Copy Sensor – Click the Copy Sensor button. Place the OE sensor on the PAD. Click TEST to activate and retrieve the sensor data, after this is successfully done, place the Autel MX-Sensor on the PAD. Click PROGRAM to write in the retrieved original sensor data to the MX-Sensor.
Create Sensor – Click Generate ID to create a sensor ID compatible with the selected vehicle. Place the MX- sensor on the PAD. Click PROGRAM to write in the generated sensor ID to the MX-sensor and activate it.
What comes with this kit
MaxiTPMS Programming Accessory Device (PAD)
USB Cable
Quick Start Guide
CD with PC Software
FCC Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. Note: This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
IC Warning:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device. Le présent
appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to
other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.