stadium SMD5MP LED Multicolour Strip Lighting User Guide

stadium SMD5MP LED Multicolour Strip Lighting

CONTENTS

• 1 X 5 Metre RGB SMD LED Strip
• 1 X Flexible joiner
• 1 X RGB Control box
• 1 X Power adapter
• 1 X Wireless remote controller
• 1 X Alcohol cleaning wipe.

FEATURES

• 5 Metre RGB SMD LED Strip
• Wireless remote control
• Low power consumption
• Adjustable light intensity (Dimmer)
• Light transitions (Flash, Strobe, Fade, Smooth – speed controlled using brightness buttons)
• 16 Colour presets
• Water resistance rating IP54

SPECIFICATIONS

• Power supply model: (XY24Z-1202000H-AW)
  Approval number: SAA-192115-EA
  Input voltage: AC100 -240V
  Output voltage: DC12V
  Total: 24W

• RGB remote Control Box:
  Input voltage: DC12V
  Output   Voltage: DC 12V 2A X 3 Channels
  Total: 36W

• SMD LED strip:
  Input voltage: DC12V
  Total: 24W Max
  Length: 5 Metres

ASSEMBLY INSTRUCTIONS

Connect the LED Strip male connector into the RGB Control box as shown in the picture below. From there your then connect the Power supply to the RGB Control box as the picture also shows below. The other cable on the Control Box is the IR sensor for the Remote.

If you would like to shorten the LED strip simply cut across the copper contacts with scissors as shown below.

NOTE: that you do not cut the wrong end of the LED Strip.

1. Cut along black line marked with scissor icon
   

2. Use extension to connect
   

3. Remove silicone to expose copper contacts
   

4. Slide the copper contacts under the metal contacts on the extension for connection
   

5. Snap close cover to secure
   

6. The alternative to cutting is to use the adapter joiner at ends of LED strip to join strips together. Arrows on joiners show orientation
   

ADHERING TO A SURFACE

To stick the LED strip onto a surface, simply peel off the paper sticky underside as shown below. Before installation of the LED strip please ensure that you wipe the surface with an Alcohol prep pad (not supplied) to make sure it is free of dust and grease. Press and hold the LED in position for at least 60 seconds for maximum adhesion.
NOTE: Although LED Light Strips can be installed in curved and irregular spaces, avoid sharp bends or bending on the solder joints as you could damage the light strip.

USING THE REMOTE

• Connect the RGB IR remote control box to the LED strip wire, then plug AC/DC Adapter to the remote control box and turn on switch at power source to activate
• Aim and press remote control at IR control box to change functions
  

WARNINGS

• This product is designed for indoor use only
• The maximum load on the power supply is meant only for 5 meter length in series
• Make sure that the LED strip has been installed correctly before use. If in doubt, contact a qualified electrician
• Do not connect the Power supply and LED strip when they are still in the package
• Do not install near any heat sources to prevent damage to the lighting fixtures from high temperatures
• If the product, cable, LED connector or controller is damaged, contact the retail store you bought this product from before use
• Please do not use anything other than the accessories provided in the package otherwise the product may result in fire, electric shock and/or injury
• Although the LED strip is quite flexible, the smallest possible angle radius is 6 mm
• Do not press too hard on the LED Strip as it may damage the LED’s and other components.
• Do not damage the wire connections on the circuit board
• Disconnect the product from the power supply during installation
• This appliance is not a toy. Do not let children play with it.

TECHNICAL ASSISTANCE

Please retain your proof of purchase receipt in order to make a claim about faulty products or services. If you need assistance setting up or using your Stadium product, or make a claim now or in the future, call Stadium Support. Australia
TEL: 03 – 8587 8898
FAX: 03 – 8587 8866
Mon-Fri 9am – 5pm AEST

If you would like to download a digital copy of this manual, or other Stadium
manuals/software, please visit the http://stadiumsound.com.au website and search for the product model number for more information, accessories and products. Alternatively scan the QR code below.

This manual is considered correct at time of printing but is subject to change. For latest manuals and updates refer to the website.

References

• Homepage | Stadium Sound

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>