stadium LED Multicolour USB Strip Lighting User Guide
- June 7, 2024
- stadium
Table of Contents
MULTICOLOUR USB STRIP LIGHTING
LED1 USER GUIDE
CONTENTS
- 1 X 1 Metre RGB SMD LED Strip
- 1 X Joiner
- 1 X Alcohol cleaning wipe
FEATURES
- 1 Metre RGB SMD LED Strip
- In-line remote control
- Low power consumption
- Adjustable light intensity (Dimmer)
- Light transitions (Flash, Strobe, Fade, Smooth – speed controlled using brightness buttons)
- 20 Colour presets
- Water resistance rating IP54
INSTALLATION & JOINING STRIP WIRES TOGETHER
Select the appropriate mounting position, make sure the power supply can be
plugged in without excessive tension on the cable. LED strips can be trimmed
to length by cutting at copper join. See picture below
NOTE: that you do not cut the wrong end of the LED Strip.
Plug the remote
onto the strip lighting, then plug the USB end into the USB-powered device and
test before adhering to a surface.
Use a joiner with an extension cable to connect 2 strips together. Arrows on
extension ends show orientation for joining, see pic 1. Forbear end connection
use joiner as displayed in pic 2
ADHERING TO A SURFACE
To stick the LED strip onto a surface, simply peel off the adhesive backing
layer from the underside as shown below. Before installation of the LED strip
please ensure that you wipe the surface with an alcohol cleaning wipe to make
sure it is free of dust and grease. Press and hold the LED in position for at
least 60 seconds for maximum adhesion.
NOTE: Although LED Light Strips can be installed in curved and irregular
spaces, avoid sharp bends or bending on the solder joints as you could damage
the light strip.
USING THE REMOTE
WARNINGS
- This product is meant for indoor use only
- Make sure that the LED strip has been installed correctly before use. If in doubt, contact a qualified electrician
- Do not connect the Power supply and LED strip when they are still in the package
- Do not install near any heat sources to prevent damage to the lighting fixtures from high temperatures
- If the product, cable, LED connector or controller is damaged, contact the retail store you bought this product from before use
- Please do not use anything other than the accessories provided in the package otherwise the product may result in fire, electric shock and/or injury
- Although the LED strip is quite flexible, the smallest possible angle radius is 6 mm
- Do not press too hard on the LED Strip as it may damage the LED’s and other components.
- Do not damage the wire connections on the circuit board
- Disconnect the product from the power supply during installation
- This appliance is not a toy. Do not let children play with it.
TECHNICAL ASSISTANCE
Please retain your proof of purchase receipt in order to make a claim about
faulty products or services. If you need assistance setting up or using your
Stadium product, or make a claim now or in the future, call Stadium Support.
Australia
TEL: 03 8587 8898
FAX: 03 8587 8866
Mon-Fri 9am 5pm AEST
If you would like to download a digital copy of this manual, or other Stadium manuals/software, please visit the http://stadiumsound.com.au website and search for the product model number for more information, accessories, and products. Alternatively, scan the QR code below.
http://www.stadiumsound.com.au
This manual is considered correct at the time of printing but is subject to
change. For the latest manuals and updates refer to the website.