CrossWave X7 Light Indication/Error Codes | Support
- June 7, 2024
- Bissell
Table of Contents
CrossWave X7 Light Indication/Error Codes
| Error Notification | Light Indication | Possible Causes | Remedies |
|---|---|---|---|
| Lights Blinking in Battery | Safety Shut Off/Internal Error | Turn machine |
off> Remove from docking station and keep turned off for 10 minutes > Attempt
to turn machine back on > If issue persists, Contact
Us
Triangle Error and Fan Error indcators are blinking| | Fan Error| Turn machine
off for 10 minutes > Attempt to turn machine back on > If issue persists,
Contact Us
Dirty Water Tank Full indicator blinks 4 times, then turns solid| | Dirty
Water Tank is full/Dirty Water Tank is not seated properly| Go to Cleaning
Dirty Water Tank
Clean Water Tank indicator blinks then turns solid and brush roll window
blinks blue 4 times then turns solid white| | Clean Water Tank is empty/not
seated properly| Remove Clean Water Tank > Fill with water and BISSELL formula
Reseat tank, pressing it firmly into place until it clicks
Brush Roll Window is blinking blue and triangle error light is blinking| | Pump Error| Turn machine off for 10 minutes > Attempt to turn machine back on If issue persits, Contact Us
Brush roll window is blinking white and blue| | Brush Window not Attached| Remove and reinstall brush window > hook the two hooks in front and rotate back until it clicks into place
Brush roll window is blinking white and triangle error light is blinking| | Brush Roll Obstruction| Go to Brush Not Turning
If remedy does not resolve the issue, please Contact Us
- Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>