My BISSELL™ MyAir™ Personal Air Purifier is not blowing air out of the vent | Support
- June 7, 2024
- Bissell
Table of Contents
-
The air inlet may be blocked
-
* Machine should be at least a foot away from walls or furniture (air should be allowed to circulate freely)- Turn machine off and unplug
- Remove the bottom cover – twist clockwise to unlock
-
- If the filter is in the plastic protective wrap, remove plastic and reinstall
- Twist bottom cover counter clockwise to lock into place
-
Plug in & turn on
-
The power button will always be illuminated when the machine is plugged in
- If only the power button is illuminated, the machine is turned off
-
Push power button to turn on – all lights will be lit up (defaults to Low when 1st turned on)
- Push Fan Speed button once to select High
- Place hand over the top of the machine, check for air flow
- If there is air flow, the machine is in night mode (Display lights are not visible)
- If there is no air flow (fan is not turning) but the lights are on
- Turn machine off and unplug
- Plug machine back in and turn on
- If all lights are on, no airflow (fan not turning) please Contact Us
-
Recipient Email
-
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>