AirRam® Cordless Vacuum Cleaning Filters | Support
- June 7, 2024
- Bissell
Table of Contents
Maintaining the Filter is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Bin & Filter
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
-
Remove Dirt Bin > Grasp clear handles & pull up
-
Lift up on the release tab to open the Dirt Bin
-
While holding over a trash container > Move the Slider Bar towards the open end to empty debris from Dirt Bin
-
Move theSlider Bar back > Close the Dirt Bin Door
-
On the opposite end of the Dirt Bin Door > Pull on the black tab to remove Filter
- Remove Foam Filter from Separator
- Both pieces can be rinsed in warm water
- Allow to completely air dry (24 – 48 hours) before reinstalling
-
Once dry > return Foam onto Separator > Slide into Dirt Bin > It will click when secure
-
Firmly push Dirt Bin into machine > It will click when secure
-
For replacement Filters > Go to Parts & Supplies
-
If you were having suction issues and the steps above did not resolve > Go to Brush/Foot Area
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>