CrossWave X7 Cleaning the dirty water tank | Support
- June 7, 2024
- Bissell
Table of Contents
If orange dirty water tank indication light is illuminated, but the dirty
water tank is not full, follow these steps below:
-
Turn machine off
-
Remove dirty water tank by pressing down on button on top of tank, grab front handle and pull tank out
-
Grasp top of tank from sides and pull up to remove tank lid
-
Remove strainer from tank
- Discard debris & rinse
-
Pour dirty water tank into sink and rinse
-
Remove filter from the tank lid
-
Hand wash filter & screen with warm water, remove debris
- Allow 24 hours for filter to fully dry before reassembling
-
Rinse dirty water tank lid
-
Clean float sensors on the bottom of dirty water tank lid with damp cloth or napkin
- Remove all visible debris and let completely dry before reassembling
-
Once all parts have dried – put filter back into dirty water tank lid, strainer back into dirty water tank, and dirty water tank lid back onto the tank
-
Insert dirty water tank back into the machine inserting the bottom of the tank first, pivot the top toward the machine until it clicks into place
-
If orange dirty water tank is full light continues to be illuminated after the dirty water tank and sensors have been cleaned, please Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No