My PowerLifter™ Pet/Powertrak® Pet/PowerTrak®/Momentum® Pet Vacuum Brush is not Turning | Support
- June 7, 2024
- Bissell
Table of Contents
If you’re experiencing issues in the Brush Area such as Brush Not Turning
follow these steps to resolve:
-
Unplug machine
-
Recline handle > Unscrew 6 Phillips head screws to remove Brush Access Plate
-
Lift the Brush Cover (1307/1309) off the Vacuum or remove the Brush Access Plate from bottom (1790/1792/1793)
-
Remove Brush from machine by pulling straight out
-
Inspect Lower Hose, Belt and Brush Access Plate for damage
- If damaged > Replace the damaged part > Go to Parts & Supplies
-
Stand Brush on a flat surface
- Hold the top with one hand > Spin/flick the brush with your other hand > It should spin freely – (several times with one flick)
- If Brush does not spin freely > Replace Brush > Go to Parts & Supplies
-
Clear any debris on the Brush Roll and in the Brush Housing Area
-
Place the Belt over the Motor Pulley > Stretch the other end over the Brush Roll
-
Replace the Brush Roll
- Place the belt side of the brush in first, then turning the other end until it slides into place
-
Stretch Belt until the Brush is secure
- Rotate Brush several times to align Belt correctly
- Reinstall Brush Access Plate and screws
- Reinstall the Brush Cover
-
Has this resolved the issue?
- Yes > Great! Glad we can get you back to cleaning!
- No > Visit a BISSELL Authorized Service Center or Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>