CleanView®/PowerClean® Rewind Pet Vacuum Cleaner Cleaning Filters | Support
- June 7, 2024
- Bissell
Table of Contents
Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
-
Remove & empty Dirt Tank
-
Remove the Cyclone by twisting to the left to disconnect & remove
- Cyclone can be washed and rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Remove all Filters
-
Open the Tank Lid > Remove the Carbon and Foam Filters
- Filters can be washed and rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Remove the Post-Motor Filter
-
Recline the Vacuum> Remove the Filter Door just above the Height Adjustment Knob by pushing down on the latch and pulling the door out
- Grasp the sides of the Filter and pull to remove
- The pleated Post-Motor Filter may not be washed, replace Filter as needed
-
For replacement Filters > Go to Parts & Supplies
-
If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>