My ProHeat®/PowerSteamer®/PowerLifter® PowerBrush Upright Carpet Cleaner is Leaking | Support

If your machine appears to be leaking, follow these steps to resolve:

• Unplug machine

• Recline handle and remove tank

• Take out 4 screws holding the black plate and red gasket on the bottom of the water tank

• Press x-valve located in the center of red gasket with finger to verify the spring is freely moving in and out

  • If valve doesn’t spring back, a new auto-load assembly needs to be ordered > Go to Parts & Supplies

• Verify the bladder has a tight seal to the bottom of the tank by inserting a finger inside the bladder along the edge and lifting slightly upward

  • If bladder is damaged at all, a new tank should be ordered > Go to Parts & Supplies 

• Reassemble machine

• Does machine still appear to be leaking?

  • Yes > A new tank needs to be ordered > Go to Parts & Supplies 
  • No > Great! Glad we could get you back to cleaning!

• Recipient Email

Your Email

Your Name

Was this answer helpful?

Yes
No

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>