Hard Floor Expert® Canister Vacuum suction level lights | Support
- June 7, 2024
- Bissell
Table of Contents
-
If the suction level lights are blinking simultaneously, this indicates there is a clog and there is no suction
-
Look at the extension wand and handle for clogs
-
Clogs in the extension wand may be removed by pushing a broom stick through wand and/or pushing something flexible with blunt edges through the handle
-
Be sure not to use anything that may scratch any of the components
-
Inspect the post-motor filter at the back of the machine for clogs
-
The Post-motor filter is not washable and should be replaced when dirty
-
Push the tab on the filter door down and remove filter door
-
Recipient Email
-
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>