My TurboClean DualPro Pet/PowerForce PowerBrush Pet XL Brush is Making a Loud Noise | Support

If your machine is making an abnormally loud noise it is likely due to the

belt slipping or the brush roll being incorrectly installed, follow these steps to resolve:

• Turn off and unplug machine

• Remove both tanks

• Locate the brush access cover

• Turn machine on its side with the brush access cover facing up

• Use a Phllips-head screwdriver to remove 3 screws from brush access cover > Set screws aside

• Remove brush access cover to expose the cogged belt and brush roll

• Remove 2 screws from brush access plate > Set screws aside

• Remove brush access plate to expose flat pump belt

  • If belt has slipped, place back onto pulley
  • If flat pump belt is broke or damaged, a replacement should be ordered > Go to Parts & Supplies

• Remove brush cover by pulling straight up

• Remove cogged large pump belt and check for damage

  • If damaged a replacement belt should be ordered > Go to Parts & Supplies

• Remove brush roll and clear of any obstructions or hair wraps

• Test that brush roll can spin freely

  • If brush roll is damaged or cannot spin freely, a replacement should be ordered > Go to Parts & Supplies 

• Replace flat pump belt around the red area of the large pulley

  • Use your thumb to stretch it toward the back of the machine and transfer it to the metal axel

• Replace cogged pump belt wrapping new belt around small metal toothed pulley

  • While wrapped around pulley, stretch and wrap around brush gear

• Has this resolved the issue?

  • Yes > Great! Glad we could get you back to cleaning!
  • No > Go to After Cleaning Care

• Recipient Email

Your Email

Your Name

Was this answer helpful?

Yes
No

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>