Pet Stain Eraser PowerBrush After Cleaning Care | Support
- June 7, 2024
- Bissell
Table of Contents
To clean your machine between uses, follow these steps below:
-
Turn Machine Off
-
Sit machine upright on a flat surface and remove dirty water tank
-
Empty Dirty Water Tank by opening the plug and emptying the contents
- Rinse Dirty Water Tank under water and set aside to dry
-
Remove Formula Tank by grabbing both sides and pulling outward
-
Remove Suction Lens by raising latch at the top and pulling outward
-
Rinse Suction Lens under water, wipe any debris from the front of the machine
- Let dry
-
Put Suction Lens back onto machine
- Attach front lip to front of the machine by the brush roll, rotate lens towards machine until it clicks into place
-
Put Formula Tank back onto machine until it clicks into place
-
Put Dirty Water Tank back on machine by aligning the bottom of the tank with the hook on the machine
-
Rotate the tank forward until the latch has clicked into place
-
To clean the brush roll and brush roll chamber > Go to Brush Roll Maintenance
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No