My CleanView/PowerEdge/PowerGlide Pet Slim Cordless Vacuum has No Suction | Support
- June 7, 2024
- Bissell
Table of Contents
If your vacuum is not suctioning like it used to it is likely due to an
obstruction in the air pathway
Follow these steps to resolve:
-
Test for suction at the end of the Extension Wand
- Remove Foot from the end of the Extension Wand
- Turn On, hold hand over end of Extension Wand
-
Is there suction at the end of the Extension Wand?
- Yes > Go go Brush/Foot Area
- No > Disconnect the Extension Wand from the Hand Vac
- Turn On, hold hand on end of Hand Vac (where Extension Wand connects)
-
Is there suction at the end of the Hand Vac opening?
- Yes > This would indicate there is a clog in the Extension Wand
- Look through Extension Wand > Clear debris
-
No > Remove Hand Vac and clear debris from openings
-
Turn ON > Hold hand over Circular Suction Inlet (Where top of Dirt Tank fits)
-
Is there suction at the Circular Suction Inlet?
- Yes > This would indicate the Filters need to be cleaned
- Go to Cleaning Filters
- No > please Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>