AeroSwift® Compact Bagless Vacuum Cleaning Filters | Support
- June 7, 2024
- Bissell
Table of Contents
Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
-
Remove & empty Dirt Tank
-
Twist the Dirt Tank Lid counter clockwise to unlock the Tank Lid and remove the Separator
- Clean Separator of all debris
- Separator can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Remove the Rubber Gasket located in the top of the Separator
- If damaged or missing > Go to Parts & Supplies
-
Remove the Pre-Motor Filter from the Tank Lid
- Filters can be washed in warm water with mild dish soap > Allow to completely air dry (24 – 48 hours) before reinstalling
-
For replacement Filters > Go to Parts & Supplies
-
If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>