My Pet Hair Eraser®/PowerLifter™/Auto-Mate®/CleanView® Corded Hand Vacuum has no power | Support
- June 7, 2024
- Bissell
Table of Contents
-
Unplug machine
-
Run hand along entire length of power cord, it should be smooth
-
Check plug for damage
- If either the cord (not smooth or exposed wires) or plug (prongs) are damaged, visit a BISSELL Authorized Service Center or Contact Us
-
Check to see if outlet is working:
- Test this by plugging in a cell phone charger or small appliance
- If no power to outlet, test a different outlet in a separate room
- Reset circuit breaker if needed
- If machine still does not have power, visit a BISSELL Authorized Service Center or Contact Us
-
This machine has a thermal protector
- Wait 30 mins for the machine to cool down
- Reasons thermal protector may activate:
- Dirt container is full
- Machine has a clog
- Filters are dirty
- If the machine still has no power, please take it to a BISSELL Authorized Service Center or Contact Us
-
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>