PowerGlide®/Cleanview® Lift-Off® Pet Upright Vacuum Cleaning Filters | Support
- June 7, 2024
- Bissell
Table of Contents
Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
-
Remove the Dirt Tank by pressing the Tank Release Button
-
Empty contents from Dirt Tank
-
Remove all Filters
-
Remove the Filter Cover to acceess the Pre-Motor Foam Filter
- Remove Pre-Motor Filer
- Filter can be washed and rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Remove the Post-Motor Filter by pulling out the side clips
- Tap the Post Motor Filter against a waste bin to remove dust and debris
-
Reattach without the Post-Motor Filter
-
For replacement Filters > Go to Parts & Supplies
-
If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>