BARKBATH™ After Use Maintenance | Support
- June 7, 2024
- Bissell
Table of Contents
-
If dirty water tank is at the full line, empty it
-
Remove the tool on the end of the hose
-
Attach the adaptor tool
-
Attach the hydrorinse tool
-
Switch the machine to rinse mode
-
Plug machine in and turn it on
-
Press and hold the trigger for 30 seconds
-
Release trigger and let the machine run for an additional 30 seconds to clear out water in the hose
-
Turn machine off and unplug it
-
Remove the dirty water tank
-
Twist the dirty tank cap and remove the seperator stack
-
Pour out the dirty water
-
Handwash your dirty water tank with mild dish soap
-
Let it dry for 24 hours before reassembling
-
Place the seperator stack and cap onto the dirty water tank and twist until firmly tightened
-
Place dirty water tank back onto the machine
-
Recipient Email
-
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>