My Lift-Off® Floors & More Lightweight Stick Vacuum has no suction | Support

June 7, 2024
Bissell

  • Machine should be fully charged to check the following steps

    • Machine must be in the OFF position while charging

    • Detach Hand Vac from body

    • Remove dirt cup

    • Turn machine on & place hand over motor duct grill on Had Vac

    • Empty Dirt cup

    • Clean the filter of any debris

      • Filter can be washed with mild dish soap and warm water
      • Allow to completely dry (24 – 48 hrs.) before reinstalling in dirt cup
      • Filter should be replaced as needed
    • Remove debris/clogs from nozzle

    • Remove foot assembly by pressing button on back of foot assembly and pulling foot

    • Check handle for debris where foot attaches and where hand vac attaches to handle

    • Check for clogs in foot assembly opening

    • Re-attach foot assembly, should hear a loud click

      • If machine is still not suctioning, please Contact Us
    • Recipient Email

Your Email

Your Name

Was this answer helpful?

Yes
No

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals