My PowerSwift™/Easy Vac®/AeroSwift® Compact Vacuum is Blowing/Scattering Debris | Support
- June 7, 2024
- Bissell
Table of Contents
If your vacuum is blowing/scattering debris try these quick steps:
-
Adjust the Height Adjustment Knob to the appropriate setting for your floor type
- The Brush will continue to rotate on this model which can cause a scattering affect on bare floors
-
The Hose should be completely inserted into the Lower Hose while vacuuming to prevent debris from escaping at the connection
-
If you’re still experiencing blowing/scattering of debris it is likely due to a clog or blockage
-
For steps to resolve this issue > Go to No Suction
-
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>