My CleanAlong® Bagged Canister Vacuum has no power | Support
- June 7, 2024
- Bissell
Table of Contents
No Power to Machine
- Unplug vacuum
- Run hand along entire length of power cord, it should be smooth
- Check plug for damage
- If either cord (not smooth or exposed wires) or plug (prongs) are damaged, visit a BISSELL Authorized Service Center or Contact Us
- Check to see if outlet is working:
- Test by plugging in a cell phone charger or small appliance
- If no power to outlet, test a different outlet in a separate room
- Reset circuit breaker if needed
- Check hose power cord
- If hose power cord is not attached to base, power will not turn on
- If still no power, please visit a BISSELL Authorized Service Center or Contact Us
No Power to Powerhead
-
Make sure the brush motor is turned on at the hose grip
-
Make sure the handle is reclined
- If locked in upright position, brush motor automatically shuts off
-
Make sure the extension wand power cord is firmly plugged in at the hose grip and at the powerhead
-
Check the extension wand power cord for damage
- If it is damaged, or if there is still no power to the powerhead, please visit a BISSELL Authorized Service Center or Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>