VOGUE Stainless Steel Mop Sink User Manual
- June 7, 2024
- VOGUE
Table of Contents
VOGUE Stainless Steel Mop Sink User Manual
Stainless Steel Mop Sink Assembly Instructions
GL281 Mop Sink: 450(H) x 500(W) x 500(D) mm
Safety Tips
Whilst all care has been taken to remove sharp edges, care must be taken when
cleaning or handling to prevent risk of injury from exposed
metal edges.
DO NOT overload the sink top or shelf causing it to bend.
Part List
Assembly
NOTE: Be sure to check all packaging materials for any small parts that may
have come loose during transportation.
1. Remove all protective film, taking care to avoid scratching the surface.
2. Place the shelf on its side on the floor.
3. Insert the leg into the sockets situated at each corner of the sink
[Fig.1, Fig 2].
4. Use grub screws to loosely fix the shelf to the legs, and then stand
upright. [Fig.3]. Ensure the legs are level before tightening the grub screws.
5. Fix the grid top in place. [Fig. 3] Ensure the sink top is both level and
securely fixed.
NOTE: Adjust the feet if necessary to level the table.
Before using for the first time VOGUE recommend the table is cleaned
thoroughly with a suitable cleaning agent. Remove all cleaning residues and
dry thoroughly.
Cleaning
- Clean the sink regularly using a cleaning agent suitable for use with stainless steel and galvanized surfaces.
- Always remove cleaning agents residues, this can discolour the surface.
- Never leave any surface damp as this may cause discoloration.
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of VOGUE. Every effort is made to ensure all details are correct at the time of going to press, however, VOGUE reserve the right to change specifications without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>