axis Heavy Duty High Resolution Camera Instruction Manual
- June 7, 2024
- AXIS
Table of Contents
INSTRUCTION MANUAL
ECC80
Series 2
Heavy Duty High-Resolution Camera
2YEAR WARRANTY
SPECIFICATIONS
– Image Device: 1/3” CMOS
– Diagonal Viewing Angle: 120°
– Signal System: PAL
– Effective Pixels: 1.23m
– Resolution: 700 TV Lines
– Sync System: Internal
– Orientation: Mirror Image
– Night Vision: Yes, 5 IR LEDs
– Illumination: 0 Lux with IR LED on
– Ingress Protection: IP69K
– Integrated Microphone: Yes
GENERAL
- Powered by DC 12 volts, negative ground.
- Universal heavy-duty applications
- A high-quality CMOS image sensor is utilized
- Automatically adjusts picture quality with changes in light
- Operates over a wide temperature range
WIRING DIAGRAM:
A. 90cm Camera Tail – Terminates to 4-Pin (M)
B. 20m Extension Cable – 4-Pin (F) to 4 -Pin (M)
C. 40cm Adapter Cable (For RCA Input Monitors)
4-Pin (F) to RCA (M) (Video-Yellow; Audio-White), 12V/Earth
CAMARA INSTALLATION:
A. Attach the supplied mounting bracket to the vehicle. Adjust the angle of the camera and fasten the screws firmly.
B.
Run the cable from the monitor to the camera.
To adjust the camera mounting angle
This system is a reversing guide only and
does not replace careful driving.
Design and specifications are subject to change without notice.
WARRANTY
Congratulations on your purchase of a quality Mobile
Safety System! You’re joining thousands of satisfied customers who enjoy &
experience the benefits of the products we distribute. In the unlikely event
that some technical difficulty arises with your purchase, be assured that we
are most anxious to see that the problem is quickly rectified to our
satisfaction. Please familiarise yourself with the following simple conditions
of our warranty. This warranty covers faults through component failure or
failure of the product to operate in accordance with published specifications.
Product failure as a result of unreasonable environmental conditions,
accident, misuse, improper installation, unauthorized repair, vehicle
electrical or wiring faults or neglect etc, will not be covered by this
warranty. Removal and installation costs, if any, would be paid by the owner
as well as any freight or postage costs of transporting the product to
AudioXtra. AudioXtra shall not be liable or responsible for any loss of use of
this product or any form of consequential loss.
CONSUMER WARRANTY
This product is warranted by AudioXtra Pty Ltd to be free from defects in
materials and workmanship under NORMAL USE for a period of TWENTY FOUR
MONTHS
from the date of purchase.
WITHIN 30 DAYS OF PURCHASE DATE: Please return the unit for a replacement
to our National Service Centre or the Retailer from where you made the
purchase. All accessories must be included. Proof of purchase date must
accompany the products.
AFTER30 DAYS OF PURCHASE DATE: Warranty repair and service is carried out
by our National Service Centre. Repair and service will be carried out at no
cost to the owner if proof of ownership and the date of purchase can be
verified to the satisfaction of the authorized center concerned with this
repair. This proof should take the form of either:
a) The warranty card accompanying this product, stamped and dated by the
dealer.
b) A Tax Invoice or Receipt showing full details of the original vendor,
purchaser, model number, and serial number.
COMMERCIAL WARRANTY: A product used in or associated with a commercial
application will carry a limited SIX MONTH warranty. An abnormal commercial
application is one where usage, dust, vibration, heat/cold and other
environmental conditions exist at an extreme level.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
Please complete details below in the event of warranty service being required.
Purchaser’s Name: ____
Purchaser’s Address: ___
Model Number: ECC80 Series 2 Serial Number: _
Dealer Name: _____ Date of Purchase:
Dealer Address:
Invoice/Sales Docket no:…
General Hints: To expedite service and prompt return of the equipment, please:
a) Clearly describe the fault in detail
b) Safety and security pack the unit for transport
c) Include your return address
d) Provide proof of purchase date as outlined above
National Service Centre:
10 STODDART ROAD, PROSPECT, SYDNEY NSW 2148Australia
Telephone: (02) 8841 9000 Fax: (02) 9636 1204
email: services@audioxtra.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>