MOULTRIE Feeder Feet Gen2 User Guide
- June 7, 2024
- MOULTRIE
Table of Contents
Instructions for Feeder Feet Gen2
THANK YOU for your purchase of the Feeder Feet Gen2. Please read this sheet
before operating the unit. If you should have any questions about this product
or any other Moultrie product, please contact us using the information on the
back of this sheet. To help us to better serve you and to activate your
Lifetime Warranty, please submit your warranty information online at
http://www.moultriefeeders.com/warranty
INSTALLING ON 1.5” SQUARE TUBE LEGS
| WARNING: Do not use feeder feet on hard/slick ground or surfaces without
stakes.
---|---
-
Remove pin from feeder feet assembly.
-
Slide whole assembly into 1.5” Square tube feeder leg.
-
Insert pin through-hole of leg and adapter.
-
Insert Stake through foot into the ground to the desired depth.
-
Repeat for all three feeder feet.
|
INSTALLING ON 1.25” SQUARE TUBE LEGS OR 1.25” ROUND LEGS
---|---
-
Remove pin from feeder feet assembly.
-
Press in button and remove adapter from feeder feet assembly.
-
Press button and insert foot into square leg (or round leg) until button snaps in place into hole in leg
-
Insert Stake through foot into the ground to the desired depth.
-
Repeat for all three feeder feet.
| WARNING: Do not use feeder feet on hard/slick ground or surfaces without stakes.
---|---
Our Service Department will gladly answer any questions you have.
www.moultriefeeders.com/support
08132020 / MFG-13455
Documents / Resources
|
MOULTRIE Feeder Feet
Gen2
[pdf] User Guide
Feeder Feet Gen2
---|---
|
MOULTRIE Feeder Feet
Gen2
[pdf] User Guide
Feeder Feet Gen2
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>