S4A 500KG Waterproof Magnetic Lock Instructions
- June 7, 2024
- S4A
Table of Contents
S4A 500KG Waterproof Magnetic Lock Instructions
Main Parameters
- Voltage: DC12V/24V
- Current:0.5/0.25A
- Armature piate: 185mmL x 61mmW x l2mmD
- Magnet: 230mmL x 63mmW x 4OmmD
- Holding force: 1200LBS
- Operating temperature: -5°C
Diagram
Typical installation:
-
Out-swing door
-
In-swing door
Armature Plate Mounts To The Door
Attention: Please do not over tighten the screw for the armature plate,this will ensure the rubber washer maintain the required elasticity, allowing the armature plate to auto-adjust to the proper position in accordance to the magnetism.
Connection
-
DC12V: red and yellow connects +, black and green connects — (chart 1)
DC24V: red connects+ , and black connects—, ( yellow and green are in the line.) (chart 2)
DC12V Input Wiring:
Connection Method (chart 1)
DC24V Input Wiring:
Connection Method (chart 2) -
Door sensor connection method (optional) (chart 3)
If a normally open signal is needed , please connect the black and green wires.
Door sensor
Armature and magnet are properly alignet
Input voltage too low or insufficient contact between armature and magnet
(chart 3)
For more information, please visitwww.devancocanada.com or call toll free at 855-931-3334