soundcore Flare Mini A3167 User Manual

: June 7, 2024
: Soundcore

Table of Contents

Safety Instructions
What’s Included
At a Glance
Using Your Soundcore Flare Mini
- Turn On / Of
Charging your Soundcore Flare Mini
Specifications
Declaration of Conformity
Customer Service
FAQs
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

soundcore Flare Mini A3167 User Manual

Safety Instructions

Avoid dropping.
Do not disassemble.
Soundcore Flare Mini can be immersed in water up to 1m for up to 30 minutes.
Avoid extreme temperatures.
Do not use the device outdoors during thunderstorms.
Use original or certified cables.
Do not use any corrosive cleaner/oil to clean.
Do not expose batteries to high heat as direct sunlight, fire and Etc.

What’s Included

Included items

At a Glance

Product Overview

Bluetooth Button
Volume + and – Buttons
Multi-function Button
Light Effects Button
Power Button
micro USB Port

Using Your Soundcore Flare Mini

Turn On / Of

Turning On/Off Instructions

ON: Press
OFF: Press and hold for 2 seconds

Bluetooth mode

Connecting Bluetooth

Flashing Blue: Bluetooth Pairing Mode
Solid Blue: Connected to a device
Enter True Wireless: Stereo Pairing Mode / Disconnect True Wireless Stereo
Slow Flashing: White True Wireless Stereo Pairing Mode
Solid White: Connected to True Wireless Stereo

With True Wireless Stereo technology, you can pair your Soundcore Flare Mini with another Bluetooth speaker to explore the best sound effects with left and right sound channels separated on both speakers.

Play / Pause
Play Next Song
Play Previous Song
Answer Call / End Call
Reject Call / Switch between a call on hold and an active call
End current call and answer incoming call / End current call and switch to call on hold
Switch audio source between Speaker and Phone
Activate Siri / Other Voice Control Software
Volume Up / Down
Solid White: On a Call
Flashing White: Incoming Call
Press and hold for 2 seconds to turn Light Effects Off
Press to turn Light Effects On
Press once to switch between Light Effect modes

When turned on, Soundcore Flare Mini will automatically connect to the last connected device if available. If not, press the Bluetooth pairing button to activate pairing mode.

To pair a different device, press the Bluetooth button to re-enter pairing mode. Then repeat the pairing steps.

Having connection problems? Remove Soundcore Flare Mini from your device’s Bluetooth history and ensure it’s less than 3 feet away. Then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your speaker.

Charging your Soundcore Flare Mini

Charging Instructions

Slow Flashing: Red Low Battery
Solid Red: Charging
Off Fully Charged

Use the included USB cable to charge your Soundcore Flare Mini and make sure it is fully charged before its first use.
Disconnect your speaker from the charger when fully charged. Do not charge your speaker for extended periods.
When not in use, store your speaker in a cool place.

Specifications

Specifications are subject to change without notice.

Input: 5 V 1 A
Audio output: 5 W x 2
Battery capacity: 2600 mAh
Charging time: 3.5 hours
Play time (varies by volume level and music content): 12 hours
Size: 141 x 86 x 72 mm
Weight (without packaging): 480 g / 16.9 oz
Bluetooth version: V4.2
Range: 20 m / 66 f

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the radio equipment type A3167 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.soundcore.com