FEIYUTECH FY WG2 3 Axis Wearable Gimbal User Guide

: June 7, 2024
: FeiyuTech

FEIYUTECH FY WG2 3 Axis Wearable Gimbal User Guide

Usage Scenario Demonstration

Rainy
Drift
Swimming

Guidelines For Usage

WG2 has precision machinery transmission mechanism, water proof design can completely use in raining and water splash scene, it can be used in the water under certain conditions, please follow the requirements below when use in the water, otherwise, there are risks of damage.

Please ensure the usb plug has been covered before using underwater, dry it and place in a ventilated place to dry before charging.
When use under water, depth of water should be less than 0.5m, and time of continuous use less than 5mins.
Used in sea water environment at risk of damage that is not recommended
When it is splashed by sea water, please wash it with fresh water immediately, and soak it in fresh water for 3mins, otherwise, the rotation of gimbal will be blocked by the salt crystals after the sea water dried.

It is normal phenomenon if there is a small amount of liquid flow from gimbal or the gimbal is smelly, the liquid is waterproof paint, a few pungent smells.

User Guide

Install the Camera
Remove fixed block,install the camera on retainer plate, then fix the camera with retainer bar and screws.
Power on / off
Attention: Make sure the camera is secure before powering on the gimbal.
Power On: Press and hold function button until the green light is on. Power Off: Press and hold function button until the red light changes from quick flashing to always on.

In case of low battery, the red LED indicator flashes for three times for ! every 5 seconds.Please charge WG2.

Product Overview

The showing sports camera is only for reference

Vertical Forward

Camera in left Camera in right Camera in left

Camera in left Inverted Camera in left Camera in right

App download and connect

Download App

Please download Feiyu ON at your smartphone
app store or can the QR code below.

Requires iOS 9.0 or later, Android 6.0 or later.
1. Connecting App
  （1）Power on the gimbal.
  （2）On smartphone, enable bluetooth and open Feiyu ON App. Login or register,follow instruction and connect to the gimbal.
  Once the connection is successful, the gimbal can be controlled on the App, including remote direction, switching mode, setting parameters and etc.

Mode /Function

Panning Mode

Tilting and rolling direction are fixed, and the cameralens moves according to the hand movement of the user.

Panning and Tilting Mode

The rolling direction is fixed, and the camera lens moves according to the hand movement of the user.

Lock Mode

The orientation of the camera is fixed.

Reset

Reset the tilting axis of the gimbal to initial orientation and initialmode.

Indicator Status Mode Status
Blue light flashes once Panning
Blue light flashes twice Panning and tilting mode
Blue light on steadily Lock mode / Initializing
Blue light keeps flashing Initialization failure / Malfunction
Red light flashes three times Low battery
Red light keeps flashing Turning off

Mode /Function Operation Instructions

Single tap Double tap

Panning Mode / Lock Mode Panning and tilting mode

Single tap to switch between panning mode and lock mode When in panning and tilting mode, press once to switch to lock mode
Triple tap Rotate 180°in horizontal Make the camera lens rotate 180 ° Quadruple tap Fifth tap

Autorotation Mode Initialization Quadruple tap to enter autototation mode Single tap again to awake the gimbal, or triple tap to initialize the gimbal

Autorotation Mode

Four times clicks on function button, gimbal will access the autorotation mode setting. Manually turn the gimbal to an initial position, then click again on function button for recording it.Manually turn the gimbal
to end position, then click the functionbutton again for recording it. Gimbal will turn to the initial position and begin autorotation.

Four times clicks on function button, gimbalwill access the autorotation mode setting.
Turn the panning axis and tilting axis to the position ① and hold for half a second.Click on function button,record the position ①.
Turn the panning axis and tilting axis to the position ② and hold for half a second .Lick on thefunction button again, record the position ②.
Gimbal will recover to position ① automatically. Tilting axis and panning axis turn to position ②at constant speed.The gimbal is automatically reset after the end.

Combined use of gimbal autorotation function and motion camera time-lapse photography function willmake the camera achieve the excellent effect of time- lapse photography.Theoretical time and gimbal
autorotation speed adaptation effect is better, Feiyu ON APP can set the autorotation speed.

Annexed parameter table： Gimbal speed setting and theory time adaptation reference table.

WG2 speed setting	WG2 theory time

1

2

Manual Lock

Manual lock ，pull to the specified angle to stay half a second can be lock the current angle.(The tiltingaxis and panning axis in the lock mode can be manual lock and the tilting axis can be manual lock
in the panning mode.)Take the tilting axis as an example:

Hold the camera and change its angle in tilting axis direction.
Keep this position for half second, the current angle will be locked manually.

Firmware Upgrade

Option 1: connect the gimbal with PC via micro USB cable, and then upgrade the firmware. Please visit the official website www.feiyu-tech.com to download the relevant software for upgrading, including USB driver,firmware upgrade software and product firmware, and install the relevant software, decompress the firmware files
Option 2: connect the gimbal with smartphone via bluetooth, and then upgrade the firmware.

Gimbal initialization

You can initialize your gimbal:

when camera is not level
if not used for a long period of time
in case of extreme temperature variations

Note: If the initialization is not successful for a long time, long press the function button to turn off the gimbal,restart it and then initialize.

Parameters

Titling Angle 40mm 360°

Rolling Angle 70° __

Panning Angle 360° __

Titling Increments min 1.5°/s max 150°/s __

Panning Increments min 1.5°/s max 270°/s

Weight 265 g (Not including camera)

Usage time 2.5 Hours __

Adaption Weight 130 g __

D I S C L A I M E R

Prohibit any user for any illegal purpose. Users will be responsible for all behaviors of purchase and use products.
The Company assumes no liability for any risks related to or resulting from the debug and use of this product (including the direct, indirect or third- party losses).
For any unknown sources of using, we will not be at any services.
The updating and changes of product firmware and program may cause changes in function descriptions in this user manual, please read the instructions carefully before
upgrading the firmware and use the corresponding user manual. You can get the latest user manual from the official website: www.feiyu-tech.com FeiyuTech reserves the right to amend this manual and the terms and conditions of use the product at any time.

Attention

Please correctly assemble the gimbal in accordance with the diagram
Please install the camera before powering on the gimbal
When the gimbal is not in use or placed on the table, please ensure it is powered off