Soundcore Icon+ User Manual

June 7, 2024
Soundcore

**Soundcore Icon+ User Manual

**

Safety Precaution

  • Avoid dropping.
  • Do not disassemble.
  • Don’t submerge in water.
  • The product shall not be exposed to dripping or splash.
  • Avoid extreme temperatures.
  • The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
  • Do not use the device outdoors during thunderstorms.
  • Use original or certified cables.
  • Do not use any corrosive cleaner / oil to clean.
  • Keep out of reach of children. It contains small parts which may be a choking hazard.

What’s Included

What’s Included What’s
Included What’s Included

At a Glance

At a Glance

  1. 3.5mm Audio Input Port
  2. USB Type-C Port
  3. Power Button
  4. Bass Button
  5. Volume – Button
  6. Multi-Function Button
  7. Volume + Button
  8. Bluetooth Button
  9. Bluetooth Indicator
  10. Power Indicator
  11. Bass Indicator
  12. Carry Handle

Powering On/Of

Powering On/Off

Power On Press Steady white (Power indicator)

Power Off Press and hold for 2 seconds Off (Power indicator)

Pairing

Normal mode

Pairing

Enter Bluetooth pairing mode Press and hold for 1 second
(upon powering on) 1”

Pairing mode Rapidly flashing blue

Connect to a device Turn on Bluetooth connection on your media
device (mobile phone etc.) and tap to select “Soundcore Icon+”.

Connected to a device Steady blue

TWS Group Mode

With TWS (True Wireless Stereo) technology, you can pair your Soundcore Icon+ with another Soundcore Icon+ to enjoy stereo sound with separate left and right channels.

TWS Group Mode

Enter TWS Group Bluetooth pairing mode (upon powering on Press and hold the Bluetooth button for 2 seconds  the two Soundcore Icon+ speakers at the same
time.
TWS Group pairing mode Rapidly flashing white
Connect to a device (TWS Group)

  1. After entering TWS pairing mode, wait about 5 seconds
    for the two Soundcore Icon+ speakers to automatically
    connect wirelessly.

    • Steady blue (the second Soundcore Icon+ speaker)
  2. Turn on Bluetooth connection on your media device
    (mobile phone etc.) and tap to select “Soundcore Icon+”.

Connected to a device

  • Steady blue (both the first and second Soundcore
    Icon+ speaker)

When turned on, Soundcore Icon+ will automatically connect to the last
connected device if available. If not, press the Bluetooth button to activate
pairing mode.
To pair a different device, press the Bluetooth button to re-enter pairing mode. Then repeat the pairing steps.
To disconnect Soundcore Icon+ from your media device, press the Bluetooth button on the unit or disconnect “Soundcore Icon+” on your device. Having connection problems? Remove Soundcore Icon+ from your device’s Bluetooth history and ensure it’s less than 3 feet away. Then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your speaker.

Controls

Bluetooth mode

Play / pause Press

Next track Press twice

Previous track Press three times

Volume up down Press

BassUp™ (Dual Equalizer) Press Note: Press again to switch back to
Normal Equalizer. Steady white (BASS indicator

Normal Equalizer(default)  Press Off (BASS indicator)

Mobile phone

Answer/End call Press

Reject a call Press and hold for 2 seconds

Incoming call Rapidly flashing blue

On a call Rapidly flashing blue

Activate Siri / Other voice control software Press and hold for 3 seconds

AUX-In

AUX-In

Plugging in an audio cable will automatically switch to AUX mode, and Bluetooth mode will be turned off.

App Control

The Soundcore Icon+ speaker supports App control which allows you to adjust the EQ, view product information, and upgrade the firmware. Download the Soundcore App from the App Store or Google Play.

Charging Your Soundcore Icon+

Charging Your Soundcore Icon+

Battery low Slowly flashes (Power indicator)

Charging Steady red (Power indicator)
Note: Do not switch on Soundcore Icon+ while charging

Fully charged  Off (Power indicator)

Soundcore Icon+ does not support PD quick charging and can not charge other media devices

Updating Soundcore Icon+’s Firmware

There are two methods to upgrade the firmware:

  1. OTA online firmware upgrade through the Soundcore App.
  2. Manually upgrade the firmware for Soundcore Icon+ through the USB Type-C cable (go to https://www.soundcore.com/update-firmware to download the firmware.

Specifications

Specifications are subject to change without notice

Input: 5 V 2 A
Power consumption: 20W
Battery capacity: Max 5200mAh
Charging time: 4 hours
Playtime (varies by volume level and music content): 12 hours
Size: 229 ×72 × 68 mm / 9.0 × 2.8 ×2.7 inch
Weight (without packaging): 685 g / 24.2 oz
Bluetooth version: V5.0
Bluetooth range: 20 m / 66 f

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals