anko 42949244 BLUETOOTH PARTY SPEAKER User Guide

anko 42949244 BLUETOOTH PARTY SPEAKER User Guide

Warning

Important precautions:

1. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, suchas vases, shall be placed on the apparatus.
2. Minimum distances 100 cm around the apparatus for sufficient ventilation.
3. The ventilation should not be impeded by covering the ventilation opening swith items,such as news papers, table-cloths or curtains.
4. No naked flame sources such as lighted candles,should be placed on the apparatus.
5. When the mainsplug or and appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
6. To be completely disconnected the power input, the mains plug of apparatus shall be disconnected from the mainscom pletely.
7. The main plug of apparatus should not be obstructed or should be easily accessed during intended use.
8. The use of apparatus in moderate climates.
9. Attention should be drawn to the environmental aspects of battery disposal.
10. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
11. Excessive sound pressure from earphones and headphones can cause hearing loss.
12. The internal battery is non-user replaceable.
13. Do not use this apparatus near the water

Package contents

1. Speaker x 1
2. Remote control x 1
3. AC power cable x 1
4. User manual x 1
5. AUX in Cable x 1

Product specifications

DESCRIPTION OF REAR PANEL

1. Previous Button
2. REC Button
3. MODE Button
4. Power Button
5. Charge RED Battery Indicator
6. DC 12V 5A Input
7. AC Input
8. LED ON/OFF Button
9. Volume Knob
10. Next Button
11. Treble Knob
12. Bass Knob
13. Audio Output Jack
14. AUX Input Jack
15. Play/Pause Button
16. PRI (Priority) Button
17. USB Input Slot
18. TF Card Slot
19. MIC Volume Knob
20. MIC Echo Knob
21. MIC Dleay Knob
22. MIC Treble Knob
23. MIC Bass Knob
24. Guitar Knob
25. Microphone 6.35mm Input Jack
26. Guitar 6.35mm Input Jack

DESCRIPTION OF REMOTE CONTROL

Getting Started

Connecting Power Cable
Warning:Ensure the AC/Charge switch is in OFF position before plugin.Plugin the AC connector into the 220-240V 50Hz inlet socket in the rear panel of the unit and the other end into the standard AC 240V wall socket.

1. Do not plug or unplug the power cable while you have wet hands.
2. To protect this apparatus from alightning storm, or when left unattended and unused for long periods of time, unplug power cable from the wall outlet.
3. When unplugging the power cord from a wall outlet, always pull on the power plug only.
   Never unplug it by pulling the power cord.

Charging the internal Battery

The speaker comes with a built-in rechargeable battery, follow the below steps to charge it:

AC INPUT(220-240V) Charging

1. Please connect the power cable on the rear panel and plugin to the 220-240V 50Hz wall socket to charge the speaker.
2. When start charging, the RED LED indicator will light on.
3. When almost full charging, the RED LED indicator will keep flashing.
4. When full charge, the RED LED indicator light will light off.

DC 12V IN Charging
Connect the DC cable of the external power supply to the DC 12V IN terminals of the speaker rear panel, please corresponding connect to the Red (+) and Black (-) indicated.
Noted : This DC input not for the battery charging, only supply the power to work for the speaker.
Note : please fully charge the product when it is not going to be used for a long time and charge once a month to keep longer battery life.

Turning ON/OFF the speaker

1. Press Power ON/OFF button on the rear panel to turn on or off the speaker.
2. Use the remote control to turn it into Standby mode, press it again to power it on

Internal Battery Level indicator

1. There are three grids battery indicator symbol keeping static on the right bottom corner of
   the display screen, meaning battery capacity is full.

2. As the battery capacity less, the battery indicator symbol will become as two grids.

3. When the rest one grid battery indicator and keeping flashing,meaning the battery capacity is almost running out, please charge the battery on time, otherwise the speaker will turn off.
   Note: There is the low battery warning sound “DI DI” per 10 seconds when the battery
   capacity run out as above 3

Function Instructions

USB Operation

• This unit has a USB port for play back MP3 music.
• Insert your USB device into the USB port and the unit will start playing automatically.
• Press the [MODE] button to USB mode is selected.
• Press the or key to the previous or next track.
• Press the button to play or pause music
• Press button on the remote to repeat the current track, press it again to repeat all tracks.

FM Operation

This speaker supports FM radio function.

1. This speaker has built-in antenna, no need to insert FM antenna.
2. Press [ MODE ] button on the rear panel or on the remote control repeatedly until FM function is selected.
3. Short press button on the top panel to search the FM radio station automatically.
4. Press or to select the previous or next FM radio station.

Bluetooth function

1. Press [ MODE ] button on the top panel switch to the Bluetooth mode if the speaker on other mode, there is a prompt sound.
2. Once on the Bluetooth mode,” bLUE ” will keep flashing on the display screen.
3. Open the Bluetooth funciton of the external device and search the Bluetooth device name “42949244 ” to pair.
4. Press connect to “PAIR” with the speaker.
5. Once connected, ” bLUE ” will keep static on the display screen and can hear a prompt sound, you can play the music with the speaker.
6. You can use button or button on the rear panel or on the remote to control the songs of the external device.

TWS Connecting

Function Instructions

Connect with AUX in

1. Press [ MODE ] button on the rear function panel to switch to the Line in mode,” AUH ” will be displayed on the screen.
2. Connect this speaker Line in input jack and the device Earphone jack by provided Line in cable (supplied in the accessories)
3. Once connected,turn on your external device and play music.

Caution : Please turn off the unit before connect AUX cable in order to avoiding unexpected noise.

1. Before recording, please make sure the speaker insert a USB driver to save the record file.
2. When playing music, insert the microphone and long press REC button on the top panel to turn on the recording function and the display will show “ “, then the speaker will record the sound from the microhone to USB driver, you can speak any words or sing.
3. Short press REC button to stop the recoding and the recorded sound from the USB driver.
4. Short press REC button again can withdraw the playing record mode and back to USB playing mode.
   Note:Recording function only record the voice from microphone input. Bluetooth and AUX input are not recorded.

PRI(Priority) Function

Connect with Wired Microphone and Guitar

Connect to Wired Microphone and Guitar

Important Notes

While using the microphone, avoid being put the microphone opposite the bass of Party Speaker,as they may have Whistler Noisy.
To get the best singing performance, keep the micro phone within 5-15cm of the mouth and at a 45 degree angle.
When using the microphone, always pay attention to the battery. If the battery is low, the indicator light will come on and the performance will progressively become poor.
Caution: Please do not put the microphone directly face to the Party speaker, it may damage the speaker.

Warranty

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>