Rreslicam DF-01 Indoor Camera User Guide

DF-01 Indoor Camera Product Guide

**Product Diagram

**

1. sensor lamp
2. Photoresistor
3. Microphone
4. PassiveInfraRed
5. Lens| 6. Power indicator
7. Loudspeaker
8. Reset button
9. SD card slot
10. Power port
---|---

1 Box Content

2 Installation

1.On stucco brick or concrete install the anchors using the provided drill bit and a power drill before installing the mounting bracket.
2. On wood or siding, you can skip this step and screw the bracket directly into your wall.
3. Attach Your camera to the Bracket
Line up the holes in your camera with the slots on the bracket.
Push firmly towards the wall and then down until you feel a click

3 Installation

Keep it in the range of your router.
Make sure to pick a place within range of your network. Thick or insulated walls can greatly reduce the strength of your Wi-Fi signal even if your router is close by, so you should try streaming video before you mount your camera.
Place it up high.
But not too high. We find 7 to 10 feet above the ground, Fixed housing, is best – close enough to see someone’s face and talk with them through the camera. Check the video in the IPC360 app to make sure Rreslicam is seeing what you want to see

Device initialize

1. Connect the power adapter cable to the camera power adapter.
2. Make sure the camera indicator is red and flashing. If not, please reset the device.
   (1) Long press the reset key for 3S.
   (2) When there are two beep sounds, and the indicator goes red and flashes, it means the device has been reset successfully.
   (3) If the indicator fails to go red and flash, please unplug the power supply and plug again. Two beep sounds will be heard if the camera power on successfully,
   and the indicator will enter red and flashing status.

Step1： Download APP

1. search for IPC360 in the application store OR google play, then download and install the APP
2. Scan the QR code below to download and install IPC360.

Step2： Add camera

1.  Connect phone with 2.4G WiFi. ※Wireless Mode only supports 2.4G Wi-Fi
2. Open the IPC360 app, register, and log in with your email address.
3.  Enter the camera list screen, click “+” on the top right corner.
4. Select the camera option on the Device type
5. Select the Wireless Mode on the Network Mode
   ※Please confirm again Make sure the camera indicator is red and flashing. If not, please reset the device.
   See device initialization for details ( On page 6 )

Step3： Wireless connection

1. When the indicator is in red flashing status, click Next, input WiFi password, then click Next, enable phone volume, and bring the phone close to the camera.2. When there is a doorbell sound, it means the connection is made successfully. Wait for around 15S, a prompt dialog box will appear to remind you that the camera is added and you need to rename the camera. After renaming the camera, it is successfully added.

PLACEMENT GUIDELINES

To avoid the risk of overheating and burns:
Use only in temperatures between –4° and 104°F (–20° to 40°C).
Keep out of direct sunlight.
Do not block airflow to Nest Cam.
To avoid the risk of fire and shock:
Use only the provided USB cable and power adapter. We recommend using only an electrical outlet equipped. with a ground fault circuit interrupter (look for “Test” and “Reset” buttons on your outlet.)
To avoid the risk of another serious injury:
Keep the camera and all components out of the reach of children and pets.
For more information, visit Facebook: Rreslicam Need help Contact us at Rreslicam@outlook.com

Please recycle Rreslicam’s packaging

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>