KENT Auto Sanitise-6 Instruction Manual
- June 7, 2024
- Kent
Table of Contents
KENT Auto Sanitiser-6
Ideal for
Factories, Offices, Banks, ATMs, Railways Hospitals, Malls, Shops & Homes,
etc.
INSTRUCTION MANUAL
Dear Customer
At the outset, allow us to thank you for your trust in KENT. We take pride
in our reputation for product quality and industry-proven performance. We are
certain that your decision to own a KENT Auto Sanitiser-6 will go a long way
towards keeping you and your employees in good hygiene & health. We are
confident that you will be satisfied with its performance and that it will
serve your need for safer premises without any compromise on hygiene and
cleanliness.
This guide will help you in getting the best out of your KENT Auto
Sanitiser-6. Please go through this booklet to familiarize yourself with its
operation and maintenance.
You can look forward to years of trouble-free service. To ensure that the
warranty of your Auto Sanitiser is effective, it is important that you fill up
the enclosed warranty card and mails us the installation report within 15 days
of purchase. In case you need any further information, contact your nearest
KENT dealer or branch. Best Wishes, KENT RO SYSTEMS LTD.
KENT AUTO SANITISER-6
KENT Proudly presents KENT Auto Sanitiser-6, which will go a long way towards keeping you and your employees in good hygiene & health. We are confident that you will be satisfied with its performance and that it will serve your need for safer premises without any compromise on hygiene and cleanliness.
FEATURES
- Transparent tank for sanitizer
- High Storage Capacity of 6L
- Removable tank for cleaning and easy refilling
- Fully automatic and Touchless use for hands-free operation
- Optimal and Powerful Spray
- Light on the hand along with the spray to display dispensing
- Bulk Sanitiser is economical in the longer run
ITEMS IN THE BOX
- KENT Auto Sanitiser-6: 1
- Screws & Plastic Inserts : 2 each
- Sticker Center Drill: 1
- Syringe (50 ml) : 1
- Warranty Card: 1
INSTALLATION INSTRUCTIONS
KENT Auto Sanitiser-6 is designed to facilitate only wall-mounting usage. The
sanitizer is easy and convenient to install.
Recommended Site Preparations:
- Single Phase 230 V AC
- Installation space as per dimensions of the sanitizer
- Make sure that the sanitizer is mounted on a wall. Avoid installation on wooden and metallic stands
- The system and installation must comply with state and local laws and regulations
Installation Procedure:
- Paste the central drill sticker on the wall at (4.5 feet to 5.0 feet from the ground) as per your convenience.
- Ensure that sticker is pasted straight on the wall, then drill holes as per the space provided on the sticker.
- Now, insert the puff up with the help of a hammer.
- Screw in two 10X50 self-tapping screws, 5.57 inches (141.5 mm) apart horizontally.
- Carefully hang the purifier on the wall with the help of the wall-mounting slot holes provided on the backside of the sanitizer.
Note: If the wall is not straight or the screws are not properly drilled
in an even position, it will damage your sanitizer. Note: Keep the device away
from heat.
Step-2
- Connect the power supply.
- Installation is complete.
STARTING-UP THE SANITISER
- Switch on the power supply
- Fill storage tank to the maximum level
- Before using for the first time run the machine until the liquid sanitizer comes out from the bottom so that pump will be primed (See priming procedure)
- Sanitiser is ready to use
HOW IT WORKS
- Place your hand below the bottom of the dispenser at the middle
- Required (to be adjusted by a technician only) quantity of the sanitizer gets sprayed
- The dispenser become ready for the next person after 3 seconds
PRIMING OF THE PUMP
During installation as the pump will be used the first time, priming needs to
be done to remove the air in the line so that the pump can operate.
Note: Above shown images are for reference only.
CLEANING & MAINTENANCE
- Removable tank for refilling and cleaning
- Sanitiser Refill- open the cover to take the tank out. Fill the sanitiser and put the tank back
Note: In case spray nozzle that blocked. Please contact your nearest KENT dealer or branch, Mishandling of the same may lead to discontinuing the warranty.
IMPORTANT SAFETY INSTRUCTIONS
- If the supply cord is damaged, it must be replaced by the original part in order to avoid a hazard
- Children should be supervised to ensure that they do not play with the appliance
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety
TECHNICAL SPECIFICATIONS
Product|
:
| KENT AUTO SANITISER-6
---|---|---
Product Code|
:
| 12012
Product Generic Name
|
:
| Hand Sanitser
Product Colour
|
:
| White
Mounting|
:
| Wall-mounting
Electrical Input
|
:
| 230 V AC
Capacity of Sanitizer
|
:
| 6 L
Dispensing Qty.
|
:
| Adjustable amount (1-1.5 ml)
Working Voltage
|
:
| 24V DC
Auto Sensing Distance (range required)
|
:
| 200mm to 250 mm
Sensing Time
|
:
| 200mS Typical
Between sensing 3 seconds gap is required
Sensor Type
|
:
| Infrared Sensor
Hands to be used (Single or multi)
|
:
| Will work with both options
Net Weight
|
:
| 5.50 kg
Product Dimensions (mm)
|
:
| 390 (L) X 285 (W) X 440 (H)
Total Power Consumption
|
:
| 40W
Marketed by:
KENT RO SYSTEMS LTD.
E-6, 7 & 8, Sector-59, Noida, U.P.-201 309, India.
E-mail: sales@kent.co.in | Website:
www.kent.co.in
Manufactured by:
KENT RO SYSTEMS LTD.
1. Khasra No. 93, Village-Bantakhedi, Tehsil-Roorkee, District-Haridwar,
Uttarakhand – 247 668, India.
2. A-6, Sector-87, Noida-201 305, U.P., India.
For customer complaints, contact Customer Care Officer at:
E-6, 7 & 8, Sector-59, Noida, UP-201 309, India. Call: 92-789-12345
E-mail: service@kent.co.in or visit us at
www.kent.co.in