Jabra UC Voice 250 MS User Manual

June 3, 2024
Jabra

18/08/2022 17:03
Jabra UC Voice 250 MS

UC Voice 250 MS

Why does call control not work with my ShoreTel softphone even though I followed the post installation steps of Jabra Direct?

Compatible Mitel/Shoretel softphones

  • Mitel/Shoretel Communicator v.14, 15
  • Mitel/Shoretel Connect Onsite

Confirm successful installation

Call control may not work because the ShoreTel Telephony Interface is not installed properly, or the Mitel/ShoreTel softphone failed to configure properly. Use the following steps to check the installation and configuration.

  1. In the Control Panel, click Phone and Modem.

  2. On the Advanced tab, verify that ShoreTel Remote TAPI Service Provider is listed as shown in the following screenshot.
    Jabra UC Voice 250 MS-

  3. Click Configure. The ShoreTel Remote TSP dialogue opens.
    Jabra UC Voice 250 MS-fig1

  4. In the Provider Usage section, verify that Use this service provider (enable) is selected.

  5. If you cannot verify these steps, the ShoreTel Remote TAPI Service Provider is not installed properly. Reinstall it, and then reboot your computer.

  6. Verify that the ShoreTel integration displays the Ready status in the Jabra Direct home screen.

https://www.jabra.com.au/supportpages/jabra-uc- voice-250/2507-823-109/faq/07dfc6682241-48c8-a7f6-9a778e76c96f

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals