alpha technics Charger User Manual
- June 7, 2024
- alpha technics
Table of Contents
Use a phone
to scan this QR Code:
Open camera, Scan and open a link
User manual
You can find video tutorials on www.alpha-technics.com
The camera will split the video into 5 min segments to protect files.
Notices:
Remove a protective film before use. Note: The protective film is very
thin.
How to watch video
We recommend to download your files by using the card reader:
- Eject your card, click on the card.
- Put your card into the card reader.
- Connect it to your computer.
- Find a flash disk and copy files to your computer.
How to adjust the angle of view
You can use an Extension cord, Swivel wall tap outlet power splitter, Wall tap with adapter spaced outlets.
Portable use
The camera can work from a power bank, USB port, charger.
Connect your camera by the M-M USB cord to the power source.
Motion detect mode
The camera has two recording modes:
Motion detect mode: Switch to M
Loop recording mode: Switch to L
This switch is located on the rear panel of the camera.
When the card is full, loop recording will begin. The device will auto-cover the earliest videos to retain the most recently recorded video.
How to mount the camera
FAQ
Q: The camera doesn’t record.
A: Check your card or re-format microSD card into FAT32.
Q: The camera doesn’t work, the indicator is blinking.
A: Plug it by M-M USB cable Use the reset pin and press the reset button
on the rear panel for 10 sec.
Q: Videos are hazy or slightly blacked.
A: Please remove the protective film.
Q: I can’t find “time.txt”.
A: Connect the camera into an outlet for 50-60 sec.
Q: How to reset the camera.
A: Connect the camera by a M-M USB cord to a power source. Press the
reset button for 10 sec.
Quick start
Step 0: Put your card into your camera.
Make sure that you use a high-speed card:
Class 10 or UHS.We recommend using:
Sandisk,Sony MicroSD UHS-I 32,64,128GB
DO NOT USE OLD CARDS, THEY DON’T HAVE ENOUGH WRITING SPEED
Step 1: Connect the camera into an outlet for 50-60sec.The camera will
format your card and create a file with settings “Time.txt”
Step 2: Unplug the camera and connect the microSD card to your computer.
Step 3: Open the text file “Time.txt” Revise the time and save.
23:59 01:29:2021 Y Y
Meaning: HH:MM MONTH:DATE:YEAR This is 24 hours format.
To turn off date stamp, change the 1st Y to N.
Change 2nd Y to X in the text file to get all features
The camera will update internal information. It doesn’t update the text
file.
Step 4: Insert the microSD card into the camera and plug the camera into
a wall. The camera will start recording.
WARRANTY INFO
HAVE AN ISSUE WITH YOUR CHARGER?
Enjoy hassle free replacements:
if your camera is defective or damaged, we will ship you a new one.
ABSOLUTELY FREE.
For fast and knowledgeable service, get in touch with one of our customer
service expert right now:
Email:support@alpha-technics.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>