AROMA White/Black Diffuser User Manual

: June 7, 2024
: Aroma

Table of Contents

AROMA White/Black Diffuser
Features:
Specifications
Instruction
- Operation Introduction
Accessories and spare parts
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AROMA White/Black Diffuser

product

AromaPlan scent diffusers are powerful, easy to use and the most silent devices available. Our innovative technology converts the liquid perfume into dry vaporous microparticles, creating a practically invisible mist that drifts evenly throughout any space. For example, when a candle burns, its perfume is stronger the closer you get. Our devices are different. A space is scented evenly, regardless of where you are. Our devices are perfect for scenting any setting, controlling foul odors and improving the quality of indoor air in business and home environments. With AromaPlan’s diffuser you have ultimate control. You can schedule the strength of the fragrance as well as when it will automatically turn on and off, to perfectly scent your environment according to your daily needs, without ever wasting your favorite fragrance.

Features:

Easy floor or wall installation.
Space evenly scented.
No Residue.
Safe for Kids & Pets
Physical diffusion without heating and water.
Automatic scheduling on/off according to your daily needs.
Ultracold mist.
Microparticles permit immediate and even diffusion for lasting results.
Automatic mode.
Easily control fragrance concentration.

Attached Warranty Card
Please keep the Instruction and the warranty card carefully for further reference. Please read all instructions before using the machine.

Cautions: Avoid casualties and property loss, please always follow the attentions as the following.

WARNING May cause electric shock or fire hazard.

PROHIBITION

INSTALLING

Do not use unsafe plug or power.
Do not install the device at the place where children can touch.
Do not install the device at the place where can not bear strength and prone result in falling and collapsing.
Do not tilt the device.
Keep the device away from fire and heat source, prohibit to store flammable and explosive materials around the device.
Except for the atomizer, the housing material is not resistant to corrosion.
Do not use device in high temperature or wet environment.
Do not use inflammable, explosive, corrosive and other hazardous solvents work with the device.

NOTE: May cause personal injury or property damage.

NECESSARY

INSTALLING

Ensure the firmness of installation area.
Install the device in a ventilative and adequate space.
Do not block the sprayer by hand or other obstructions when the device is working.
Do not spill water or conductive, corrosive liquid on the device surface or fall inside of the device.
Do not operate device without stopping. Suggested average daily usage time should not exceed 14hours, and the third level is recommended.
Cut off the power in extreme weather environment.

Specifications

Parameter
Model: PRO300
Voltage: 12V
Power: 7.5W
Capacity: 300ml
Weight: 0.9KG
Coverage: 300~400m³
Size: 170(L)X80.5(W)X206(H)mm

ATTENTION: The screws are optional parts for fixing the equipment on walls and the air conditioning tube is optional, if it is of interest to the user, it is necessary to contact via e-mail for more information and guidance on the installation process.

Instruction

Approved Certificate: CE, FCC, RoHS, CNAS and so on.
Application Place: Brand clothing store, 4S shop, bar, clubhouse and so on.

How to use the equipment

Operation Introduction

APP Operation Introduction The device has four buttons : “ ” is the return button “ ” is the confirmation button, “ ” is the increasing button and “ ” is the shift button.
Buttons operation:
The device has four buttons:
Under the normal working interface, press “ ” and “ ” buttons at the same time to enter the password setting interface. Password: 0000
Under the normal working interface, press “ ” and “ ” buttons at the same time to turn on/off the essential oil detection function.
Under the normal working interface, press “ ” button to adjust the concentration level A, B and C.
Under the normal working interface, press “ ” and “ ” buttons at the same time to enter local time setting interface.
Under the normal working interface, press “ ” button to enter the working time and frequency setting interface.
Under the normal working interface, long press “ ” button to turn on/off the fan.
Under the normal working interface, long press “ ” button to turn off the machine.
Factory Reset:
Under the normal working interface, firstly, press the “ ” and “ ” buttons at the same time until the interface shows YES/NO, then let your hand go. Secondly, operate “ ” button to choose YES then press “ ” button to confirm itand finish the setting.
Configure your diffuser
Programming Date/Time:
Programming your AromaPlan diffuser updating the date and time is very simple. After plugging in your machine you’re going to press “ ” and “ ” buttons at the same time to update the time in a 24-hour format you’re first going to click the button “ ” in order to adjust the hour and then you’ll go to the button “ ” to update the minutes.Next, set the day of the week and the date using the same buttons as before to configure. Clicking the “ ” button changes the item, and the “ ” button moves you to the next item to be adjusted. Press “ ” button to confirm it and finish the setting.
Scenting schedule configuration: Programming working hours After configuring the date and time, configure the scenting schedule of the diffuser. The first step is to program the diffusers working hours. We will do this by pressing “ ” in order to enter these settings. Once you are in the program screen click “ ” to move from the current day to the hour.
Now we can begin adjusting the diffusers Start Time (St) by clicking “ ”, we’ll change the hour and we can click “ ” in order to change the minutes we will then click the “ ” again in order to move to the end time.
Programming working intervals
Once we have finished setting up the hours, now we are going to adjust the intensity of your fragrance this is done by setting up working intervals in seconds so we’ll click “ ” after we adjust the time to come down to your Working (W) seconds this is how long your diffuser will release fragrance, for example so we have it set to Work, by clicking “ ” button, for 30 seconds (30s). Then we will click the “ ” again in order to move it, so we can also adjust the Pause (P) for resting time. We can also adjust the Pause (P) for resting time, so for example you can set it to pause for 90 seconds (90s) by clicking in “ ” button.
Now once we have finished setting up this program screen we can press “ ” for the diffuser to begin working in the Normal Working Interface where you’ll see the countdown of the Working (W) seconds that you programmed and the Pause (P) for resting seconds that you programmed. You can programming up to five schedules.
Scenting schedule configuration:
The diffuser has three different intensity settings depending on the size of your space once you are in the home screen simply click “ ” and you will begin to see the intensity changing from A, B and C. The suggested intensity is for spaces up to 1000 square feet use intensity A, spaces is up to 1500 square feet use intensity B, spaces above 1500 square feet use intensity C and if in any case you need more intensity for your fragrance you’ll just hold “ ” for 5 second and it’ll enter into turbo mode “

Accessories and spare parts

Please clean the equipment periodically, suggest 2-3 months in 1 circle, so that it can work under best condition. Please cut off the power when cleaning, also do not use wet hand to operate it directly, in case of electric shock and injury.

Long-term non-use
Please turn off and cut off the power then roll up the power cord.
Clean the filter components.
Place the deodorant package which contains activated carbon in the device or package, to prevent residual substances in the equipment produce odor.
Please equip the machine with the dust cover, placed in the shade, ventilative place.

NAME	QUANTITY	NAME	QUANTITY

__

Aroma diffuser

| __

1PC

| Screws (including plastic expansion tube)| __

2PC

__

Adapter

| __

1PC

| __

Manual

| __

1PC

__

Cap

| __

1PC

| __

Warranty card

| __

1PC

__

Air conditioning tube

| __

1PC

| __

Bottle sealing gasket

| __

1PC

__

Key

| __

2PC

| __

Mounting strip

| __

2PC

__

Pneumatic fittings

| __

1PC

| |

After-sales Service

Provide free technical solutions and installation process guidance.
Provide free online FAQ consultation and scent-marketing suggestion.

The equipment warranty and precautions

The equipment has a 1-year warranty (from the date of purchase).
Please provide the warranty card,Invoice or other provement which can prove the equipment was ordered in our company to enjoy the free maintenance.
The human error or other wrong operation cause the fault not belong to the scope of warranty, and will not be accepted to provide free maintenance.