AROMA AG-30 Electric Guitar AMP Owner’s Manual
- June 1, 2024
- Aroma
Table of Contents
AROMA AG-30 Electric Guitar AMP
Product Information
- Model: AG-30
- Dimensions: 256*176mm
- Power: 30W
- Speaker: 8″ loudspeaker
- Bluetooth: Yes
- Made in: China
Product Usage Instructions
Panel Control:
After connecting the instrument, adjust each knob to the appropriate position:
- CLEAN VOLUME: Turn the knob to change the volume of clean tone.
- CLEAN/OVERDRIVE: Switch between clean and overdrive signal.
- OVERDRIVE GAIN: Adjust the gain for a harder overdrive effect.
- OVERDRIVE VOLUME: Change the volume of the overdrive channel.
- BASS: Control the low-frequency tones.
- MIDDLE: Control the mid-range frequencies.
- TREBLE: Control the high-frequency tones.
- REVERB: Adjust the level of reverb effect.
Bluetooth Function:
To use Bluetooth function:
- Press and hold the Bluetooth button to turn on Bluetooth. The blue indicator will illuminate.
- The amp name is AG-30. A beep sound will indicate a successful Bluetooth connection.
- When playing music via AUX IN or Bluetooth, adjust the volume using the external device.
FAQ:
-
What should I do if the fuse is damaged?
If the fuse is accidentally ruptured, use the spare part from the fuse slot. Do not use another conductor to connect the fuse or a fuse that does not fit the device. -
What should I do if there are problems with the device?
If you encounter issues with the device such as power cord or plug damage, or if liquid or foreign objects enter the device, contact a qualified person for assistance.
SAFETY INSTRUCTIONS
Please pay much attention to the following before using the amp
- Use the power cord attached. If you propose to replace the power code, please consult qualified electricity personnel or your dealer.
- Never break off the ground pin on the power supply plug.
- If the fuse is accidentally ruptured, use the spare part of the fuse slot. Do not use another conductor to connect the fuse or use a fuse that does not fit the device.
- Do not repair this product by yourself, as opening or removing the amp covers may expose you to dangerous voltage points or other risks. Reach out to a qualified person if the device has problems.
- Please turn to a qualified person if any of the below happens: the power cord or power plug is damaged, or liquid or metal gets into the device.
- Do not use or store the amp in circumstances of high humidity.
- The amp is not water-proof, do not place any container with liquid on the amp.
- The power cord should be unplugged if the amp is not to be used for a long period.
- Protect the power cord from being walked on or pinched for safety.
- Make sure that the electricity outlet, which is connected to the amp power plug, is grounded.
Keep this manual for later reference.
PANEL FUNCTION
- CLEAN VOLUME
- CLEAN/OVERDRIVE
- OVERDRIVE GAIN
- OVERDRIVE VOLUME
- BASS
- MIDDLE
- TREBLE
- REVERB
- LED INDICATOR
- BLUETOOTH
- POWER JACK
- POWER SWITCH
- 3.5 MM HEADPHONE JACK
- 3.5 MM AUX INPUT
- 6.35 MM INPUT
FEATURES
- 8″ loudspeaker, 30W
- With analog OVERDRIVE and CLEAN tone
- With EQ and REVERB control knobs
- Bluetooth inside for convenient connection with your smartphones or other devices with bluetooth function
- With headphone jack and AUX input
HOW TO USE
PANEL CONTROL
After connecting the instrument, adjust each knob to the appropriate position, the adjustable knobs are as follows.
-
CLEAN VOLUME
Turn the knob to change the volume of clean. -
CLEAN/OVERDRIVE
Change the signal between clean and overdrive. -
OVERDRIVE GAIN
With higher gain, the overdrive will be harder. -
OVERDRIVE VOLUME
Turn the knob to change the volume of the overdrive channel. -
BASS
This controls the low frequency. -
MIDDLE
This controls the middle frequency. -
TREBLE
This controls the high frequency. -
REVERB
Adjust the sound effect of the reverb.
BLUETOOTH FUNCTION
Connect bluetooth, press and hold the button” ”. The blue indicator will be on, which means the bluetooth is turned on. The amp name is“AG-30″. A beep sound“Di” will be gendered when the Bluetooth connection succeeds.
- When playing music from AUX IN or bluetooth, the volume can only be adjusted by an external device.
SPECIFICATIONS
- Input jack: 6.35mmx1
- Input impedance: 10Kohm
- Reverb type: PLATE
- Tone switch: CLEAN, OVERDRIVE
- Volume: CLEAN volume, OVERDRIVE volume
- Gain: OVERDRIVE gain
- EQ: BASS, MIDDLE, TREBLE
- Headphone jack: 3.5mm stereo output
- AUX input: 3.5mm mono input
- Peak output: 30W
- Speaker: 8″ loudspeaker
- Bluetooth version: 5.0
- Input: 220V~50Hz
- Dimension: 370×230×326mm
- Weight: 7.3kg
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
MADE IN CHINA.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>