AROMA ARU-10 Wireless Audio Transmission Instruction Manual
- June 1, 2024
- Aroma
Table of Contents
WIRELESS AUDIO TRANSMISSION
ARU-10
OPERATION MANUAL
aromamusic.cn
© 2023 Aroma Music Co.,Ltd.
PRECATIONS
Location
Using the product in the following locations could result in a malfunction.
- Locations of extreme temperature or humidity
- Excessively dusty or dirty locations
- Locations of excessive vibration
- Locations near to magnetic
Battery maintenance
When there is a low battery alarm, please charge the product as soon as
possible. The internal lithium battery cannot be stored without power, which
will seriously affect the service life of the battery.
Handling
To avoid breakage, please do not apply excessive force to the switch
buttons or other controls.
Care
If the exterior becomes dirty, wipe it with a clean and dry cloth.
Do not apply liquid cleansers such as: benzene, diluter, or other cleansers
that contain flammable compounds.
Keep other things out of your product
Do not set any container with liquid in it close to this machine. If liquid
gets into the machine, it may cause a breakdown, fire, or electrical shock. Be
careful not to let metal objects get into the equipment.
Keep this owner’s manual
After reading this manual, please keep it for later reference.
MAIN FEATURES
This wireless tarnsmission system consists of two parts ARU-10 TRANSMITTER and ARU-10 RECEIVER, adopt UHF technology.
Suitable for multiple instruments
The transmitter comes with a 3.5mm connector and a 6.35mm detachable
adapter, which is compatible with all kinds of electro-acoustic instruments
and can rotate in a large range, and can be used for different interface
positions.
One transmitter to different receivers or more transmitters to more
receivers
7 channels which allows 7 sents working at same time. And also workable to
use as one transmitter to more receivers.
Anti-interference, stable, long distance
UHF frequency with high quality signal without compression or distortion.
Super endurance
Adopt 950mA big capacity Li battery, able to use 6 hours continuously.
PARTS AND FUNCTIONS
-
6.35mm+3.35mm audio jack (TRANSMITTER)
6.35mm audio jack (RECEIVER) -
Channel indicator (7 colors for 7 channels)
-
Power indicator
-
Press and hold to turn ON/OFF, short press to switch channel (Special note: See POWER SAVING mode-power indicator.)
-
Type-C charging jack
ONE TRANSMITTER TO ONE RECEIVER
ON/OFF
Long press button for 2 seconds, the power indicator light up.
Match
When turn on the device, it will automatically match. If press the button by
mistake while using device, you can short press the transmitter or receiver
button to switch and match the same light to recover. Or turn off the
transmitter and turn on again to match automatically.
Switch channel
While using the device (transmitter and receiver already matched) just need to
short press the button to switch channels.
Notice: the indicator of transmitter will flash if not match
successfully.
MORE TRANSMITTERS TO MORE RECEIVERS
This device supports 7 sets working at same time, before usage please make
sure every channel light matches to each other, for instance one transmitter
and receiver indicator color is both red, another set both blue etc.
Notice: the receiver will occur howlround if use same frequency at same
place, to avoid this situation, please follow above instruction when using
more sets together.
Tips: When in use, put it vertically according to the receiver diagram to get the best transmission distance.
ONE TRANSMITTER TO MORE RECEIVERS
To use one transmitter to more receivers, please turn on the transmitter and receivers, it will be automatically match or switch transmitter channels to match same color receiver.
CHARGING AND POWER INDICATION
Please use the USB cable which packed (or powerbank, computor USB jack) for charging.
Charging
Power indicator flash
Power indicator keep lighting when full charged
Working
Power> 60%: indicator keep lighting
Power 60%-> 30%: indicator slowly flash (1s a time)
Power 30%-5%: indicator quickly flash (0.5s a time)
Power<5%: indicator ultrafast flash 5s to turn off automatically.
SAVING MODE
Transmitter will turn off automatically if no signal input for 30 minuts.
Receiver will turn off automatically if no connection with transmitter for 30
minuts.
Power indicator will display 30s when turn on, then the power is turned off
and the power indicator is automatically awakened every 5 minutes, and the
display time is 30s.
Power indicator will keep displaying while power below 30% to remind charging.
When the power indicator goes out, the first short press of the power button
is to wake up the power indicator, and the second short press is to switch
channels.
SPECIFICATIONS
Power: 3.7V/950mAH Polymer lithium battery
Channel: 7
Distance: 30-50m
Frequency: 20Hz-20KHz
Dynamic rang: > 106dB
Signal-to-noise ratio: >85dB
Working time: around 6 hours
Charging time: around 2 hours
Dimension: 37.2×73.2×26.5mm
Weight: 93g
Accessories: user manual, Type-C USB cable
FCC Statement
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
MADE IN CHINA
Documents / Resources
|
AROMA ARU-10 Wireless Audio
Transmission
[pdf] Instruction Manual
ARU-10 Wireless Audio Transmission, ARU-10, Wireless Audio Transmission, Audio
Transmission, Transmission
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>