AROMA AMA-30 Monitor Amplifier Instruction Manual
- June 1, 2024
- Aroma
Table of Contents
AROMA AMA-30 Monitor Amplifier
SAFETY INSTRUCTIONS
Location
Using the unit in the following locations can result in a malfunction.
- Locations of extreme temperature or humidity
- Excessively dusty or dirty locations
- Locations of excessive vibration
- Close to magnetic fields
Power supply
Be sure to turn the power OFF when the unit is not in use.
Please connect the designated AC adapter to an AC outlet of the correct
voltage. Do not connect it to an AC outlet of voltage other than that for
which your unit is intended.
Interference with other electrical devices
Radios and televisions placed nearby may experience reception interference. Operate this unit at a suitable distance from radios and televisions.
Handling
To avoid breakage, do not apply excessive force to the switches or controls.
Care
If the exterior becomes dirty, wipe it with a clean, dry cloth. Do not use liquid cleaners such as benzene or thinner, or cleaning compounds of flammable polishes.
Keeping foreign matter out of your equipment
Never set any container with liquid in it near this equipment. If liquid gets into the equipment, it could cause a breakdown, fire, or electrical shock. Be careful not to let metal objects get into the equipment.
Keep this manual
After reading this manual, please keep it for later reference.
PANEL FUNCTION
- ———— 6.35mm INPUT
- ———— 3.5mm INPUT
- ———— BASS
- ———— TREBLE
- ———— VOLUME
- ———— BACKING
- ———— LED INDICATOR
- ———— BLUETOOTH
- ———— POWER SWITCH
- ———– POWER JACK
FEATURES
- Adopts 6.5″ woofer and 1.5″ tweeter
- Standard analog power amplifier, can be used as a conventional instrument monitor, including electronic drum, bass, guitar, violin etc.
- Input 6.35mm or 3.5mm, available for different instruments and audio inputs
- Two band EQ (bass, treble) adjustable
- Bluetooth version 5.0 and independent volume control
HOW TO USE
PANEL CONTROL
After connecting the instrument, adjust each knob to the appropriate position, the adjustable knobs are as follows.
-
VOLUME
Turn the knob to change the volume -
BASS
This controls the low frequency. -
TREBLE
This controls the treble frequency. -
BACKING
Turn the knob to change the bluetooth volume.
BLUETOOTH FUNCTION
Connect bluetooth, press and hold button The blue indicator will be on, which
means the bluetooth turned on. The amp name is “AMA-30”. A beep sound “Di”
will be gendered when bluetooth connection succeed.
SPECIFIATIONS
Input jack : 6.35mm x1, 3.5mm mono x1
EQ: BASS, TREBLE
Peak output : 30W
Speaker: 6.5″ woofer+1.5″ tweeter
Bluetooth version : 5.0
Power: 15V 2.5A
Dimension: 305×238×230mm
Weight: 3.9KG
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
